8 Simple Ways to Hang a Portable Toilet Paper Holder in a Small Camper

Fitting all the essentials into a tiny camper wet bath or micro-bathroom requires creative spatial problem-solving. A loose roll of toilet paper will inevitably end up soggy, unraveled, or rolling across the floor during transit. Choosing the right portable holder keeps this basic necessity clean, dry, and exactly where it belongs when the rig is in motion.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

How to Maximize Small Camper Bathroom Space

Small camper bathrooms, especially wet baths, force every square inch to pull double duty. Traditional residential fixtures simply do not work here because they protrude too far into the precious standing space or require drilling permanent holes into thin fiberglass walls. To maximize this footprint, look for vertical surfaces, cabinet doors, and the unused undersides of shelves to reclaim lost areas.

Utilizing non-permanent, versatile mounting methods prevents damage to the RV’s lightweight interior panels. It also allows the layout to be adjusted as needs change. The goal is to keep essential items accessible without cluttering the limited physical and visual space of a 24-foot trailer or a compact DIY van conversion.

Over-Cabinet Holder – mDesign Metal Roll Dispenser

Over-cabinet holders are designed to utilize the unused space on cabinet doors, completely eliminating the need for drilling or messy adhesives. They allow the roll to hang either inside the cabinet to keep it hidden and dry, or on the outside for quick access. This makes them highly versatile for tight layouts where wall space is at a premium.

The mDesign Metal Roll Dispenser features a slim profile and sturdy steel construction that slips easily over standard cabinet doors. It keeps the roll tucked away but within reach, and its padded foam backing protects thin wood veneer from scratching or rattling during transit.

• Material: Strong steel wire with a rust-resistant finish
• Fit: Fits over interior cabinet doors up to 0.75 inches thick
• Dimensions: Compact 5.5″ x 1.25″ x 7″ design
• Protection: Non-absorbent foam backing prevents slipping and scratches

Ensure there is enough clearance inside the cabinet door for the roll to hang without hitting internal shelves or pipes. This holder is ideal for campers with under-sink cabinets near the toilet, but it is not suitable for frameless, flush-fitting cabinet doors that require a tight seal.

Suction Cup Holder – HASKO Accessories Vacuum Suction Holder

Suction cup holders provide a strong, temporary mount on smooth surfaces without requiring permanent modifications to the vehicle. They are incredibly useful in fiberglass wet baths where drilling through the waterproof barrier is out of the question. This category allows for easy relocation if the initial placement proves awkward.

The HASKO Accessories Vacuum Suction Holder uses a powerful twist-to-lock vacuum system rather than cheap, push-on suction cups. Made from premium stainless steel, it resists the high humidity of a wet bath and holds up to heavy pulling without slipping down the wall.

• Mount type: Twist-to-lock vacuum suction cup
• Material: Corrosion-resistant 304 stainless steel
• Bonus: 3M adhesive mounting disc included for textured surfaces
• Holding power: Rated for up to 22 lbs of pulling force

Suction cups require a completely non-porous, smooth surface like glass or glossy fiberglass to maintain a vacuum. Over time, temperature fluctuations inside an off-grid rig can cause suction to lose its grip, requiring occasional re-tightening. This is perfect for fiberglass wet baths but useless on matte wallpaper or raw wood panels.

Adhesive Mount Holder – YIGII Adhesive Toilet Paper Holder

Adhesive mounts offer a semi-permanent, low-profile solution that avoids drilling into delicate RV walls or hollow-core doors. They sit flush against the wall, taking up minimal physical space. This style is highly favored by van builders who want a clean, modern aesthetic without the weight of heavy hardware.

The YIGII Adhesive Toilet Paper Holder utilizes a heavy-duty self-adhesive pad that bonds securely to clean, flat surfaces. Its minimalist open-arm design allows for quick roll changes and can be mounted horizontally or vertically to fit tight corners.

• Installation: Peel-and-stick self-adhesive backing
• Material: SUS304 stainless steel with a matte black or brushed finish
• Orientation: Can be installed left-facing, right-facing, or vertically
• Profile: Low-profile bar that keeps the roll close to the wall

Once applied, the adhesive bond is incredibly strong and can damage thin RV wallpaper if removed carelessly. It also requires a full 24 hours to cure before holding any weight. This is the ultimate set-it-and-forget-it option for solid, smooth walls where drilling is not an option.

Magnetic Holder – Yamazaki Home Magnetic Toilet Paper Holder

Magnetic holders instantly attach to any magnetic metal surface, allowing for quick relocation and zero installation hassle. They are highly adaptable and can be moved outside the camper for outdoor cooking setups or repositioned inside as layout needs change. This category is perfect for steel-walled campervans and metal-sided cabinetry.

The Yamazaki Home Magnetic Toilet Paper Holder features a massive, heavy-duty magnet backing that covers the entire rear plate. Built with clean Japanese design principles, this steel holder features a small top shelf for wipes or a phone and does not budge, even when traveling over bumpy washboard roads.

• Mount: Ultra-strong full-coverage magnetic backing
• Bonus feature: Built-in top shelf for small bathroom essentials
• Material: Powder-coated steel with clean aesthetic lines
• Capacity: Accommodates standard and large rolls easily

This holder requires a steel surface to function, such as the side of a compressor fridge, a metal cabinet, or magnetic mounting plates. It is perfect for modern van conversions with exposed metal pillars or steel organization boards, but it will not work on fiberglass or standard wood paneling.

Hanging Canvas Bag – CamperSmile RV Toilet Paper Storage

Hanging canvas bags keep toilet paper completely enclosed, clean, and dry, making them the ultimate defense against wet bath moisture. They can be hung from any hook, towel bar, or headrest, making them highly portable. This category is excellent for rugged setups where gear needs to be packed away quickly.

The CamperSmile RV Toilet Paper Storage bag is a water-resistant canvas pouch designed specifically to shield toilet paper from wet bath spray. It features a secure zipper enclosure and a center dispensing slot, allowing paper to be pulled out while keeping the rest of the roll completely dry.

• Material: Heavy-duty, water-resistant canvas with sturdy zippers
• Hanging options: Adjustable strap with a heavy-duty snap buckle
• Capacity: Holds one standard or jumbo-sized roll
• Design: Enclosed cylinder style with a bottom rubber dispensing grommet

This bag must be unzipped to change rolls, and the dispensing slot can sometimes snag cheap, thin paper if pulled too quickly. It is the best choice for wet baths where the toilet paper cannot be protected from shower overspray, or for outdoor camp setups where portability is key.

Under-Cabinet Mount – iDesign Twillo Wall Mount Paper Holder

Under-cabinet mounts tuck the roll up under overhead cabinets or shelves, freeing up valuable wall and counter space. This keeps the toilet paper within arm’s reach but out of the direct line of sight. It is a highly efficient use of the dead space beneath overhead cabinetry.

The iDesign Twillo Wall Mount Paper Holder uses a compact, horizontal design that mounts directly to the underside of upper cabinets or shelves. Its steel wire frame is accented with textured plastic inserts, adding a touch of style while keeping the roll secure during transit.

• Mounting hardware: Includes screws for wall or under-cabinet mounting
• Material: Steel wire with woven plastic accents
• Dimensions: Slim 7″ x 5.25″ x 2″ profile
• Design: Open-ended arm for quick, slide-on roll changes

Under-cabinet mounting requires drilling small screws into the bottom of your cabinetry, so ensure the cabinet floor is thick enough to accept screws without puncturing the interior. This setup is perfect for layouts where the toilet sits adjacent to a vanity cabinet, but it requires a bit of DIY confidence to install safely.

Strap Roll Holder – Coleman Hanging Toilet Paper Dispenser

Strap roll holders are ultra-portable, rugged, and highly packable solutions designed for outdoor and mobile use. They are built to withstand the elements and can be hung from almost anything, including tree branches, roof racks, or grab handles. This makes them a favorite among overland truck campers and minimalist van lifers.

The Coleman Hanging Toilet Paper Dispenser is a rugged polyester sleeve that hangs from a durable webbed strap. It protects the roll from dirt and light moisture while allowing it to hang from towel bars, shower heads, or branch limbs.

• Material: Tough, weather-resistant polyester ripstop
• Attachment: Adjustable webbing strap with a plastic quick-release buckle
• Dispensing: Bottom-pull design to prevent accidental unspooling
• Portability: Collapses flat when empty for easy storage

This is a utilitarian, soft-sided holder that lacks the sleek look of permanent interior fixtures. It is perfect for weekend warriors, truck campers, or minimalist van lifers who need to move their toilet paper between an indoor portable toilet and outdoor camp setups.

Compact Stand – TomCare Freestanding Toilet Paper Holder

Freestanding stands require zero mounting, drilling, or adhesive, making them the easiest solution to implement. They can be placed anywhere on the bathroom floor and moved out of the way when cleaning or showering. This category is best suited for larger campers with dedicated dry bathrooms.

The TomCare Freestanding Toilet Paper Holder holds one active roll while storing up to three spare rolls in its base. Its raised feet keep the extra rolls off damp bathroom floors, and its wire frame design keeps the footprint remarkably small.

• Capacity: 1 active roll plus 3 reserve rolls stored vertically
• Material: Rust-resistant metal wire with a stable weighted base
• Mobility: Completely freestanding with no installation required
• Design: Sleek wire pattern that fits into tight corners

Because it is freestanding, this stand must be stowed away or secured during travel to prevent it from tipping over and sliding across the RV. It is best suited for larger travel trailers or park models where the bathroom floor space allows for a permanent corner stand and transit is infrequent.

Protecting Toilet Paper from Wet Bath Moisture

Wet baths combine the toilet and shower into a single waterproof enclosure, meaning everything in the room gets drenched during a shower. To protect your toilet paper, it must either be completely shielded or easily removable. Leaving a standard roll exposed on a wall mount will result in a soggy, unusable mess after the first shower.

Utilizing waterproof zippered bags or quick-release mounting brackets allows the roll to be stored safely in a dry cabinet during showers. If a fixed mount is preferred, position it behind a protective shield or high up near the ceiling out of the direct spray line. Always wipe down the walls before bringing the paper back into the space to avoid transfer moisture.

Choosing the Best Mounting Location for Your Layout

The ideal location for a toilet paper holder depends entirely on the layout of the camper and the motion of the occupants. Test the natural reach while sitting on the toilet before committing to any semi-permanent adhesive or screw-in mounts. Consider the swing paths of cabinet doors, bathroom doors, and slide-outs to ensure the holder will not be crushed when the RV is configured for travel.

In tight layouts, look for dead space that is otherwise unusable, such as the inside face of a cabinet door or the side of the vanity cabinet facing the toilet. Ensure there is enough physical clearance for a full-sized roll, as jumbo rolls require significantly more depth than standard rolls. A well-placed holder should be easy to reach but completely out of the way of your knees and shoulders.

Smart Storage Solutions for Tiny RV Bathrooms

Storing spare rolls in a small camper bathroom requires the same ingenuity as mounting the active roll. Humidity and vibrations can ruin backup paper if it is left loose in a damp cabinet. Utilize vertical wall space with mesh hanging organizers, or store spare rolls in airtight plastic containers tucked under the sink.

For extremely tight spaces, vacuum-sealed bags can compress spare rolls down to a fraction of their size, freeing up valuable cabinet space for other toiletries. Over-the-toilet wire baskets and adhesive shelves can also hold light items like flushable wipes and spare rolls without adding weight. By combining smart mounting with protected backup storage, the camper bathroom remains organized, functional, and ready for the road.

Finding the perfect balance between accessibility and space-saving design is key to a comfortable mobile lifestyle. With these simple mounting solutions, keeping toilet paper secure and dry in a small camper is easily achievable. Choose the method that fits your layout and hit the road with confidence.