9 No-Drill Mounts For Wireless Security Cameras On RV Exteriors

Setting up camp in a remote spot brings peace of mind, but keeping an eye on your rig requires reliable security cameras. Drilling holes into a perfectly sealed RV exterior to mount those cameras is a recipe for water damage and structural regret. Fortunately, clever non-destructive mounting solutions allow for robust surveillance without compromising the integrity of your mobile home.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why Avoid Drilling Holes in Your RV Exterior

The outermost layer of an RV is an engineered shield designed to keep out wind, dust, and above all, moisture. Punching even a tiny hole through fiberglass, aluminum, or TPO membrane disrupts this barrier and invites water intrusion. Over time, road vibrations expand these microscopic gaps, leading to hidden rot, mold, and costly wall delamination.

Beyond structural damage, drilling permanently alters the rig and can instantly void manufacturer structural warranties. For those planning to upgrade down the road, visible holes or amateur patch jobs severely tank the resale value of a travel trailer or motorhome. No-drill mounts offer the flexibility to position, test, and relocate security cameras as your campsite needs change without leaving a trace of damage behind.

Magnetic Mount – Wasserstein Magnetic Wall Mount

Magnetic mounts offer the fastest deployment for security cameras, allowing quick removal when transitioning from camp to highway speeds. The Wasserstein Magnetic Wall Mount utilizes a powerful, rubber-coated neodymium magnet base that clings to any flat, ferrous metal surface on your rig. This is the ideal tool for temporary campsite monitoring where speed of setup is the highest priority.

This mount stands out because of its robust build quality and the silicone coating over the magnetic base, which prevents scratching on your rig’s exterior paint or gel coat. It features a universal 1/4-inch screw thread, making it highly compatible with major wireless camera brands like Blink, Arlo, and Ring. The ball joint provides 360-degree rotation, so getting the perfect viewing angle takes only a quick twist.

Before buying, confirm your RV actually has magnetic surfaces, as most modern rigs utilize fiberglass, aluminum, or composite walls. This mount is best suited for steel bumpers, steel ladder frames, or rigs with steel metal skin like vintage trailers and campervans. If your rig is fiberglass, this mount is only viable if you adhere a magnetic metal plate to the exterior first.

• Load capacity: Up to 1.5 lbs
• Thread size: 1/4″-20 universal screw
• Base material: Scratch-free rubber-coated neodymium magnet

Suction Cup Mount – RAM Mounts Twist-Lock Base

When dealing with fiberglass or large glass windows, a mechanical suction mount provides an ultra-secure grip without leaving sticky residue. The RAM Mounts Twist-Lock Base is engineered for high-vibration marine and off-road environments, making it more than capable of handling stormy weather on a parked RV. It serves as an adjustable, temporary anchor point that can be repositioned in seconds.

What sets this mount apart is the twist-lock mechanism, which physically pulls the center of the cup upward to create a massive mechanical vacuum. Built from marine-grade aluminum and high-strength composite, it resists UV degradation and salt spray far better than cheap plastic alternatives. The integrated B-size rubber ball system dampens vibrations, preventing jittery camera feeds during high winds.

This system requires a completely clean, flat, and non-porous surface to maintain its seal; textured fiberglass, decals, or corrugated metal panels will cause it to lose suction. It is ideal for weekend warriors who want to set up surveillance at camp and pack it away before driving, rather than leaving it mounted during transit.

• Suction cup diameter: 3.25 inches
• Material: Marine-grade aluminum and high-strength composite
• Attachment type: B-size 1-inch rubber ball with 1/4″-20 camera thread

Gutter Mount – Wasserstein Weatherproof Mount

Elevating security cameras is crucial for maximizing their field of view and keeping them out of reach of potential intruders. The Wasserstein Weatherproof Gutter Mount clamps directly onto the existing rain gutters running along the roofline of most Class A, B, and C motorhomes and travel trailers. It provides an elevated bird’s-eye view of your campsite without requiring adhesive or permanent hardware.

This mount is constructed from rust-proof, weather-resistant materials designed to survive constant exposure to the elements at the highest point of your rig. It uses a simple thumb-screw clamp design that grips the lip of the gutter securely without crushing the aluminum track. It avoids the need for ladders during daily setup, provided you leave the clamp assembly semi-permanently attached while traveling (though checking tightness periodically is recommended).

While highly effective, you must ensure your RV’s gutters are structural and in good condition before attaching the weight of a camera. It is not suitable for rigs without external rain gutters or those with fragile, flexible plastic trim in place of metal gutter rails.

• Compatibility: Blink, Arlo, Ring, and other cameras with 1/4″-20 threads
• Installation style: Dual-screw gutter clamp
• Material: High-grade rust-resistant plastic and metal fasteners

Adhesive Mount – Wasserstein Adhesive Wall Mount

For a clean, low-profile look that stays put while driving down the highway, heavy-duty adhesive mounts are the go-to solution. The Wasserstein Adhesive Wall Mount uses industrial-strength adhesive tape to bond securely to fiberglass gel coats and painted aluminum panels. This option provides a permanent mounting point that mimics a drilled mount without risking water leaks.

The mount’s base plate is optimized to distribute the weight of the camera evenly across a wide surface area, reducing stress on the outer skin of your RV. The included weatherproof adhesive pad is designed to withstand extreme thermal expansion, resisting both freezing winter temperatures and scorching summer highway heat. Once cured, the bond is incredibly strong, keeping your camera steady even through high-speed wind resistance.

Proper surface preparation is the make-or-break factor for this mount; any grease, wax, or road grime will cause the adhesive to fail. Removing these mounts down the road requires careful application of heat and adhesive solvent to avoid peeling off your RV’s clear coat or decals.

• Adhesive type: High-bond outdoor double-sided tape
• Rotation: 360-degree swivel with 90-degree tilt
• Best surface: Smooth fiberglass, glass, or painted metal

Pole Mount – Wasserstein Pole Mount Bracket

Many RVs feature built-in exterior tubular structures like rear ladders, roof racks, or bike carriers. The Wasserstein Pole Mount Bracket utilizes heavy-duty, adjustable metal straps to wrap around these round or square profiles, turning unused structural tubes into stable camera masts. This is highly effective for securing a rear-facing camera to monitor a towed vehicle or watch the back of your trailer.

Unlike rigid plastic clamps, the flexible metal straps on this bracket can adjust to fit a wide range of pole diameters from 1.8 inches to 6.8 inches. The mounting plate itself is made of durable, powder-coated steel that resists rust and physical impacts. It offers a secure, shake-free platform that can remain permanently attached to your ladder even while traveling rough dirt roads.

Note that installing this mount too low on a rear ladder makes the camera vulnerable to theft or low-hanging branches. Ensure you tighten the worm-gear straps securely using a nut driver or flathead screwdriver, and check them occasionally for loosening due to road vibrations.

• Clamping range: Fits poles from 1.8″ to 6.8″ in diameter
• Material: Powder-coated rustproof steel
• Strap type: Dual adjustable stainless steel worm-gear clamps

Clamp Mount – SmallRig Super Clamp with Ballhead

If you want a mount that can transition from your RV ladder to a camp table, tree branch, or slide-out awning arm, a heavy-duty mechanical clamp is unmatched. The SmallRig Super Clamp with Ballhead is a professional-grade rigging tool designed for filmmakers, meaning it is built to survive high vibration and constant re-positioning. It offers an incredibly secure, tool-free grip on both flat and round surfaces.

Machined entirely from anodized aluminum alloy and stainless steel, this clamp features slip-resistant rubber pads inside the jaws to prevent marring on painted surfaces. The articulating ball head allows for precise positioning of your camera at virtually any angle, locking down tight with a single wingnut. Its compact size means it easily slips into a glovebox or gear bag when not in use.

Because this is a mechanical clamp, it requires manual tightening and is best suited for temporary campsite deployment rather than high-speed highway travel. It is perfect for travelers who want to set up peripheral security around their campsite perimeter and pack it away on travel days.

• Jaw opening: 0.59″ to 2.1″ (15mm to 54mm)
• Payload capacity: Up to 3.3 lbs (1.5 kg)
• Material: Anodized aluminum alloy and stainless steel

Twist Mount – Wasserstein Flexible Twist Mount

For ultimate placement flexibility without any hard clamping mechanisms, a flexible twist mount is an essential addition to your mobile security kit. The Wasserstein Flexible Twist Mount features a bendable, silicone-covered gooseneck style arm that can wrap around poles, awning arms, branches, or ladder rungs. It is the easiest way to temporarily position a camera without tools or permanent fixtures.

The core of this mount is constructed from a robust, flexible metal alloy wrapped in high-friction, weather-resistant silicone. This design ensures the mount holds its shape under the weight of the camera and won’t slip or scratch delicate surfaces like awning fabric or painted metal. Its lightweight, compact form factor makes it incredibly easy to pack, reposition, or adjust on a whim.

This mount relies purely on friction and the tension of the coiled arm, meaning it is not suitable for high-speed travel or heavy winds on its own. Use it exclusively when parked at camp to hang cameras from slide-out covers, tree limbs, or side mirrors.

• Length: Approximately 16.7 inches
• Exterior coating: Textured, non-slip weatherproof silicone
• Thread type: 1/4″-20 universal camera screw

Window Mount – Wasserstein Suction Window Mount

RV windows provide the flattest, most reliable non-porous surfaces on the entire vehicle exterior. The Wasserstein Suction Window Mount is designed to stick directly to glass surfaces, positioning your security camera for a clear, unobstructed view of the surrounding campsite. It can be mounted on the exterior pane pointing outward, or even placed on the interior pointing out to protect the camera from weather and theft.

This mount features a specialized, heavy-duty suction cup designed to resist temperature extremes and UV exposure without yellowing or losing suction. The bracket holds the camera body parallel to the glass, which significantly reduces glare and night-vision reflections if you are shooting through the window from the inside. It is incredibly low-profile, ensuring it does not interfere with screen doors or slide-outs.

While highly reliable on clean glass, this mount will fail if applied to sliding window frames, screens, or dirty panes. It is not recommended to keep cameras mounted on the exterior glass during highway transit due to wind shear and road debris.

• Mounting location: Inside or outside glass surfaces
• Anti-glare design: Keeps camera lens flush to the glass
• Suction technology: UV-resistant thermal-grade suction pad

Door Mount – Wasserstein Over-the-Door Mount

The main entry door of your RV is the primary point of vulnerability and requires dedicated surveillance. The Wasserstein Over-the-Door Mount slides over the top edge of your RV door or a large exterior storage locker hatch. It allows you to monitor who is approaching your rig’s entrance without drilling into the door frame or walls.

This mount features an ultra-thin metal bracket that fits snugly in the gap between the door and the frame, allowing the door to open and close smoothly without damaging the weather stripping. The housing is made of shatterproof, rust-resistant plastic that encases the camera body, protecting it from both weather and opportunistic theft. It places the camera at a downward angle, perfect for capturing facial details of visitors.

Ensure your RV door has a tight but clear gap at the top; extremely tight-fitting custom doors or those with thick hydraulic dampeners might pinch the bracket. It is best suited for standard travel trailer and fifth-wheel entry doors.

• Bracket thickness: Ultra-thin, low-profile steel sheet
• Security feature: Anti-theft camera housing enclosure
• Compatibility: Designed for standard RV door and cabinet frames

How to Secure Adhesive Mounts in Extreme Weather

Adhesive mounts offer great convenience, but their strength relies entirely on proper installation technique. To ensure an industrial-grade bond, always start by thoroughly cleaning the mounting surface with isopropyl alcohol to remove road grime, wax, and grease. Avoid using household cleaners, as they often leave behind a thin residue that prevents the adhesive from bonding directly to the fiberglass or aluminum.

Temperature during application is critical; never apply high-bond adhesive tapes in freezing cold or direct, scorching sunlight. The sweet spot for installation is between 60°F and 80°F, allowing the adhesive polymers to flow and bond properly. Once applied, apply firm, even pressure to the mount for at least 60 seconds, then allow it to cure for a full 24 to 72 hours before hanging the weight of the camera.

In extreme climates—like desert heat or freezing mountain winters—keep an eye on the edges of the adhesive pad for signs of lifting. If you travel frequently in rough weather, adding a thin bead of exterior-grade silicone sealant around the perimeter of the cured adhesive pad can prevent water from getting behind the tape and degrading the bond.

Selecting the Right Mounting Location on an RV

Finding the ideal mounting location on an RV requires balancing maximum visibility with practical constraints like slide-out clearances and Wi-Fi range. Position cameras as high as safely possible—such as near the roof line or on a rear ladder—to maximize the field of view and keep the cameras out of arm’s reach of vandals. Be highly aware of slide-out tolerances; a camera mounted too close to a slide-out flange can easily be crushed when the room is extended or retracted.

Consider the proximity of metal obstructions that can interfere with wireless signals. Placing a camera directly against large metal air conditioners, metal storage boxes, or foil-backed insulation can significantly degrade connection speeds to your indoor Wi-Fi router. Whenever possible, aim for a clear line of sight through a window or fiberglass panel to maintain a stable, high-bandwidth connection.

Finally, think about battery access for maintenance and recharging. If your cameras are not solar-powered, placing them in areas that require a tall telescoping ladder to access will turn simple battery swaps into a frustrating chore. Opt for locations that can be reached easily from a small step stool or by reaching out of an emergency exit window.

Conclusion

Protecting your rolling home doesn’t require compromising its structural integrity with a drill. By choosing the right combination of magnetic, suction, gutter, and adhesive mounts, you can build a flexible, robust security perimeter around your RV. Pick the mounts that match your rig’s specific materials, and enjoy peace of mind on your next off-grid adventure.