10 Best Waterproof Covers for Outdoor RV Gear Storage for Full-Time RVers

Setting up camp in a driving rainstorm quickly teaches you that mother nature does not care about your expensive RV accessories. For full-time RVers, protecting outdoor gear from UV rays, relentless rain, and freezing temperatures isn’t just about aesthetics—it is about preserving your mobile home’s budget. Investing in dedicated, high-quality waterproof covers is the single best way to prevent premature gear failure on the road.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why Heavy-Duty Waterproof Covers Matter for Full-Time RVers

Full-time stationary or mobile RVing subjects your gear to 365 days of environmental exposure, a pace that destroys standard consumer-grade materials in a single season. Rain seepages lead to corrosion, while unrelenting UV rays degrade plastics, rubber seals, and wiring harnesses. When your rig is your permanent home, a failed generator or rusted tongue jack is not a minor weekend inconvenience—it is an expensive, stressful disruption to your daily life.

Moisture mitigation is the core challenge of small-space, off-grid living. Water pooling on unprotected gear eventually penetrates seals, leading to electrical shorts and mold growth. High-quality waterproof covers do more than just block rain; they utilize breathable membranes that allow trapped condensation to escape, preventing the musty microclimates that rot metal and fabric from the inside out.

Choosing the right protection requires looking past generic tarps and cheap bungee cords. Specially engineered covers feature custom fits, UV-stabilized materials, and secure fastening systems built to withstand highway-speed winds and sudden storms. Upfront protection pays off by preventing premature replacements and keeping your vital systems operational no matter where you park.

Generator Cover – Champion Power Equipment 100603

An off-grid RV system hinges on a reliable generator, but leaving this critical machinery exposed to wet weather is a recipe for starter motor failure and clogged carburetors. The Champion Power Equipment 100603 storage cover acts as a heavy-duty shield when your generator sits on a bumper tray or trailer tongue. It prevents moisture, road grime, and nesting insects from infiltrating the delicate internal electrical components.

This cover stands out due to its rugged vinyl exterior and heavy-duty elastic drawstring hem, which grips the base of the unit to prevent wind lofting. The interior features a soft, scratch-resistant lining that protects the generator’s casing during bumpy transits. This cover is specifically designed for Champion 3000-to-4500-watt generators, but its boxy shape fits similarly sized portable units.

• Fits generators up to 24 x 18.5 x 18.9 inches
• Waterproof vinyl with double-stitched seams
• Adjustable quick-pull drawcord hem

Remember that this is strictly a storage cover and must be completely removed before starting the generator. Operating an engine while covered will cause immediate overheating and engine damage. This cover is perfect for bumper-mounted generator setups on travel trailers, but it is not suitable for oversized, commercial-scale open-frame industrial units.

Propane Tank Cover – Camco 40539 Heavy Duty Dual Cover

Mounted on the trailer tongue, dual propane tanks are constantly pelted by road rocks, highway wind, and direct sunlight. UV rays rot the rubber hoses, while freezing rain can jam the regulator valve, cutting off your heat and cooking fuel in freezing temperatures. The Camco 40539 Heavy Duty Dual Cover provides a hard, aerodynamic shell that deflects physical impacts and seals out water.

Unlike flimsy vinyl wraps that sag and crack, this cover is molded from heavy-duty polypropylene with built-in UV inhibitors. The smart design features a top-access lid that hinges open, allowing you to turn the gas valves on or off without removing the entire cover. It mounts securely to the tank tray using a bottom lip mechanism, ensuring it stays put at highway speeds.

• Fits dual 20-pound or 30-pound steel LP tanks
• Impact-resistant, UV-stabilized polypropylene construction
• Quick-access top door for valve operation

Full-time RVers must ensure they select the correct size option—either 20-lb or 30-lb—to prevent wind shaking. When installing, check that the bottom retainer strap is tightly fastened around the tank frame to prevent the cover from flying off on the interstate. This cover is an absolute necessity for travel trailers and fifth wheels, but it is unnecessary for motorhomes with internal propane bays.

RV Tire Covers – ADCO 3962 Designer Series Tyvek Covers

Replacement RV tires are incredibly expensive, yet they often fail from UV dry rot long before the tread wears out. When stationary, the sun’s intense rays bake the rubber compound, stripping away essential oils and causing microscopic sidewall cracks that threaten blowout disasters. ADCO 3962 Designer Series Tyvek Covers protect your suspension and tires from these invisible destructive forces.

What sets these apart is the use of genuine DuPont Tyvek fabric, which offers unmatched UV reflectivity while remaining highly breathable. The rear of the cover features a heavy-duty flannel backing that prevents scratching, while a built-in bungee strap system secures the cover behind the tire. The white top panel reflects sunlight, keeping wheel wells cool, while the lower skirt protects brakes from pooling water.

• Available in sizes fitting 24-inch to 43-inch tire diameters
• DuPont Tyvek top panel with heavy-duty vinyl sides
• Positive retention bungee cord fastening system

Proper sizing is critical here; always measure the overall outer diameter of your tire from tread to tread, rather than relying on the wheel size printed on the sidewall. If the cover is too loose, wind will rub the fabric against the rim, causing wear. This set is indispensable for anyone parked for more than a few days, but it requires a quick cleaning and drying session before being packed into tight RV basement storage.

Tongue Jack Cover – Camco 42644 Power Tongue Jack Cover

Electronic power tongue jacks are incredibly convenient, but their plastic motor housings are notorious for leaking under heavy rain. Water seeping into the internal toggle switches and gears will quickly short out the electric motor or rust the gears, leaving you hand-cranking a heavy trailer tongue. The Camco 42644 Power Tongue Jack Cover provides a tailored, waterproof barrier that keeps your electronic jack head completely dry.

Constructed from heavy-duty, UV-resistant vinyl, this cover features a soft flannel lining that prevents the vinyl from sticking to or scratching the jack housing. It secures tightly at the base with a reliable drawstring and toggle lock, ensuring rain cannot blow upward into the motor head. The neutral color blends in seamlessly with most trailer profiles while reflecting harsh sunlight.

• Universal fit dimensions: 18″ H x 13″ W x 10″ D
• Heavy-duty vinyl exterior with soft interior lining
• Secure plastic toggle drawcord closure

Keep in mind that condensation can still build up inside the cover during high-humidity weather. To prevent moisture buildup, occasionally remove the cover on dry, sunny days to let the jack head air out. This cover is a cheap insurance policy for any bumper-pull travel trailer owner, but it serves no purpose for fifth-wheel or motorhome setups.

RV AC Cover – Classic Accessories OverDrive 80-120-151001-00

Rooftop air conditioning shrouds are made of plastic that eventually becomes brittle under constant sun exposure, leading to cracks that let rainwater drain directly into your RV’s ceiling. Furthermore, winter winds blow cold air and moisture through the AC vents directly into your living space, making your heating system work twice as hard. The Classic Accessories OverDrive AC Cover seals off this vulnerable overhead entry point.

This cover is made from heavyweight wipe-clean vinyl that is laminated to a soft, non-scratch backing to protect your AC shroud. It uses a strong elastic cord hem along the bottom edge for a tight, custom-like fit that holds steady against high winds. It completely blocks dirt, leaves, and water from nesting inside the delicate condenser fins.

• Fits Coleman Mach I, II, III, and Roughneck units
• Waterproof, UV-resistant polyethylene fabric
• Drawstring hem with heavy-duty plastic tensioner

You must verify your specific AC model and dimensions before buying, as this cover is shaped for classic boxy Coleman units and will not fit low-profile, aerodynamic shrouds properly. Additionally, always remember to remove this cover before switching on your climate control in the spring, as running the unit covered will burn out the compressor. It is ideal for full-timers wintering in harsh northern climates or storing their rigs during extended breaks.

RV Bike Cover – YardStash Waterproof Outdoor Bicycle Cover

Storing bicycles on a rear-mounted bumper rack exposes them to a vortex of dirty road spray, grit, and moisture kicked up by your RV’s tires. This toxic mix quickly rusts chains, ruins gear shifters, and destroys brake cables, rendering expensive bikes useless. The YardStash Waterproof Outdoor Bicycle Cover is designed specifically to withstand the unique turbulence found at the back of a moving RV.

Unlike cheap covers that tear on the highway, the YardStash is built from heavy-duty 600D polyester with a thick polyurethane waterproof coating. It features double-stitched, heat-sealed seams that completely block rain, and heat-shielded bottom panels to prevent melting if positioned near the exhaust pipe. High-quality buckles and elastic drawcords ensure the cover wraps tightly around the bikes, eliminating flapping.

• Generous sizing fits up to two large adult bicycles
• 600D ripstop polyester with PU waterproof coating
• Top zippered panels for easy access to rack attachment points

When using this cover on a moving trailer, you must use extra ratchet straps to bind the cover tight against the bikes; loose fabric will act as a parachute and can bend your bike rack. The cover has integrated eyelets for running a cable lock through the frame for security. It is a mandatory purchase for active RVers traveling with high-end road or mountain bikes, but is less necessary if you store your bikes inside a toy-hauler garage.

Pin Box Cover – ADCO 2015 Vinyl Fifth Wheel Pin Box Cover

The pin box of a fifth-wheel trailer is packed with crucial mechanical components, including the kingpin, grease fittings, and emergency breakaway switch wiring. Constant exposure to rain washes away vital lubricants, leading to surface rust and hard, unsafe hitching processes. The ADCO 2015 Vinyl Fifth Wheel Pin Box Cover keeps this critical connection point shielded from the elements.

This cover utilizes heavyweight waterproof vinyl on the outside to deflect rain, coupled with a soft lining that keeps the metal dry and scrape-free. It features a heavy-duty hook-and-loop closure system along the bottom edge, allowing you to slip it on and off in seconds without messing with complex straps. It also blocks wasps and mud daubers from building nests in the open steel channels of the hitch frame.

• Fits standard fifth-wheel pin boxes and kingpins
• UV-stabilized vinyl with non-scratch lining
• Hook-and-loop securing system

This cover is tailored for standard factory pin boxes; if you have upgraded to an oversized aftermarket air-ride pin box (like a Trailair or Gen-Y), you may need to step up a size or look for a custom-fit cover. Always ensure the pin box is fully dry before putting the cover on to avoid trapping ambient moisture against the bare steel. It is an essential item for fifth-wheel owners who value smooth, trouble-free hitching.

RV Grill Cover – Weber 7110 Q Series Water-Resistant Cover

A portable grill is a staple of the outdoor RV lifestyle, but leaving it unprotected on a picnic table or bumper mount quickly ruins its appearance and performance. Rainwater seeping into the burner tubes leads to uneven heating, while humidity rusting the ignition system forces you to match-light your dinner. The Weber 7110 Q Series Water-Resistant Cover ensures your outdoor kitchen stays operational and clean.

Designed specifically for the highly popular Weber Q 1000 and 2000 series, this cover is made from high-performance polyester fabric that is both UV-resistant and highly breathable. It utilizes form-fitting drawcords that pull tight at the sides to keep the cover pinned down during high winds. The lightweight fabric makes it easy to fold up and store in a small drawer when it is time to cook.

• Tailored fit for Weber Q 1000/100 and Q 2000/200 series grills
• UV-inhibitor treated polyester fabric
• Side drawcords for secure wind protection

Never put this cover on a hot grill; the residual heat from the burner box will melt the polyester fibers and ruin both the cover and your cooking grate. Let the grill cool down completely for at least 30 minutes before wrapping it up. This cover is perfect for anyone using the standard-setting Weber Q series, but it will not fit rectangular, flat-top griddles like a Blackstone.

Patio Chair Cover – Classic Accessories Ravenna Cover

High-quality zero-gravity recliners make RV patio living incredibly comfortable, but their fabric and elastic lacing degrade rapidly when left out in the sun and rain. Damp chair cushions invite mold growth, while rusted steel frames can collapse unexpectedly under weight. The Classic Accessories Ravenna Patio Chair Cover offers residential-grade protection for your outdoor lounge setup.

The Ravenna collection features a Gardelle One woven polyester fabric that boasts a water-resistant coating and a protective laminated backing. It includes double-stitched seams for durability, coupled with structured air vents that keep wind lofting to a minimum and prevent interior condensation. The cover secures to the chair legs using adjustable click-close straps that lock the cover in place during heavy gusts.

• Fits standard and oversized outdoor chairs up to 38″ W x 35″ D x 29″ H
• Gardelle One water-resistant woven polyester
• Adjustable elastic hem cord and wind-resistant leg straps

This cover is designed to protect stacked chairs or individual deep lounge chairs; measure your folded chairs together if you plan to cover multiple chairs at once. This cover is relatively bulky, so you must allocate dedicated space in your RV’s basement storage compartment when you break camp. It is ideal for stationary full-timers who leave their patio space set up for weeks at a time.

RV Hitch Cover – Leader Accessories Trailer Coupler Cover

The trailer coupler is the literal lifeline connecting your RV to your tow vehicle, yet it is constantly exposed to rain, mud, and road grime. Water pooling in the coupler latch mechanism washes away grease, making it difficult to lock onto the hitch ball, while the safety chains and 7-way electrical plug corrode when left on the wet ground. The Leader Accessories Trailer Coupler Cover wraps this entire assembly in a clean, dry cocoon.

This cover is made from heavyweight 600D polyester with an added polyurethane coating to block water penetration. It is designed to slide over the entire tongue assembly, covering the manual jack, safety chains, 7-way plug holder, and coupler latch. It secures using an adjustable buckle strap system that ensures the cover does not blow away, even in howling highway storms.

• Universal fit dimensions: 14″ L x 5″ W x 10″ H
• 600D marine-grade polyester construction
• Adjustable bottom buckle strap

Always dry your safety chains and 7-way plug before tucking them inside the cover to avoid trapping moisture in the electrical contacts. If your 7-way plug already has corrosion, use a specialized contact cleaner before storing it inside the covered sleeve. This cover is an absolute must-have for travel trailer owners, but it is not applicable for motorhome or fifth-wheel setups.

How to Secure Outdoor Gear Covers Against High Winds

High winds are the ultimate enemy of outdoor gear covers, converting loose fabric into sails that can rip seams, scratch finishes, or blow away entirely. Simply relying on the stock drawcords is rarely enough when a severe storm rolls through an exposed campground. To ensure your covers survive high winds, you must actively eliminate any slack where the wind can grab the fabric.

Utilize heavy-duty ball bungees and adjustable utility straps to wrap the midsections of your covered gear, pulling the fabric flush against the object’s profile. For larger items like bike and tire covers, running a vinyl-coated cable lock through the security grommets not only deters theft but acts as a fail-safe anchor. Adding clip-on tarp clamps to loose corners provides extra tie-down points for securing paracord to heavy ground stakes.

Regularly inspect your covers after high-wind events to check for friction wear points where the fabric rubs against sharp metal corners. Placing small pieces of adhesive foam tape or pool noodles over sharp edges before covering will significantly extend the life of your gear. Taking these extra steps ensures your gear stays protected, no matter how hard the wind blows.

Conclusion

Safeguarding your outdoor RV accessories with heavy-duty waterproof covers is one of the smartest investments a full-time RVer can make. By choosing high-quality materials and securing them properly against the elements, you protect your wallet and ensure your equipment is always ready for the next adventure. Equip your rig with these essential covers, and enjoy peace of mind through every season.