6 Best Broom Holders For Rv Cabinet Doors For Small Spaces
Maximize your RV storage with these 6 best broom holders for RV cabinet doors. Discover space-saving solutions to organize your small space and shop today.
Finding a dedicated home for a broom inside an RV is a classic struggle that separates the novices from the seasoned dwellers. When every square inch of floor space counts, an upright broom becomes a dangerous tripping hazard or a constant source of clutter. Installing a reliable holder on a cabinet door transforms that wasted interior wood into a streamlined storage solution.
|
|
$11.69
|
Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!
Command Broom Gripper: Best Adhesive Option
The Command Broom Gripper is the industry standard for those who fear damaging their RV cabinetry. Its reliance on high-quality adhesive strips makes it the go-to for renters or those who prioritize the resale value of their rig. It holds surprisingly well on smooth, finished cabinet surfaces, provided the finish is clean and free of furniture polish.
This option is perfect for lightweight, collapsible brooms that don’t put excessive stress on the adhesive bond. Because Command strips are designed to stretch off cleanly, this is the ultimate “no-regrets” solution. If the location proves suboptimal after a few days, repositioning is simple and inexpensive.
Be aware that high humidity in smaller showers or kitchen areas can occasionally weaken adhesive bonds over time. Ensure the cabinet surface is wiped down with isopropyl alcohol before application to maximize longevity. If you value a modular, non-permanent setup, this is the definitive choice for your mobile dwelling.
McoMce Self Adhesive Holder: Easiest Install
The McoMce Self Adhesive Holder bridges the gap between basic utility and refined design. Featuring a minimalist footprint, it is engineered for tight quarters where bulky plastic brackets would interfere with other cabinet items. The installation is as straightforward as peeling a backing and pressing firmly against the wood.
This holder excels in cabinets where you need to maximize every millimeter of depth. Its spring-loaded mechanism provides a secure snap-fit that prevents the broom from rattling while in transit. It is the ideal pick for users who want a “set it and forget it” solution that doesn’t scream industrial utility.
One word of caution: the adhesive on these is incredibly aggressive. Once it is applied to the thin veneer of an RV cabinet door, removing it may require a heat gun or adhesive remover. Only choose this if you are certain about your placement, as it is designed for a permanent, long-term hold.
Holikme 2-Pack Holder: Best Value Multi-Pack
When outfitting a complete RV storage system, the Holikme 2-Pack offers unmatched utility for the price. Having two grippers allows for a dual-point mounting strategy, which is superior for heavier-duty items like swiffers paired with dustpans. This redundancy ensures that your tools remain static even during heavy travel days.
These holders are best suited for the organized traveler who prefers grouping cleaning supplies together. The design is utilitarian and straightforward, making it easy to integrate into a crowded pantry or utility closet. It is the most logical choice for those who want to solve multiple storage problems with a single purchase.
While the aesthetics are purely functional, the performance is consistent across various tool diameters. The silicone grips provide enough friction to hold items firmly without requiring a forceful tug to release them. For the budget-conscious owner looking to secure multiple items quickly, this is the most effective investment.
Superior Bungee-Grip: Most Versatile Grip
The Superior Bungee-Grip takes a departure from rigid plastic jaws, utilizing a tension-based bungee system instead. This is a game-changer for RVers who own specialized cleaning gear with unusual handle shapes or tapered diameters. The bungee naturally conforms to the shape of the tool, ensuring a snug fit regardless of the geometry.
This holder is recommended for those who have a mix of standard brooms, telescoping poles, and odd-shaped brushes. The tension is adjustable, meaning it won’t crush the handle of a delicate lightweight broom while still holding a heavy-duty mop in place. It is the most forgiving option for a diverse array of cleaning equipment.
However, the bungee mechanism does require a slightly larger footprint on the cabinet door compared to slim plastic clips. If your cabinet is already packed to the brim, measure your clearance carefully. For those prioritizing versatility over a slim profile, this is the superior functional choice.
Gwhole Silicone Gripper: For Odd-Sized Tools
The Gwhole Silicone Gripper is specifically designed for the friction-fit enthusiast who dislikes complex mechanical clips. The silicone interior creates high-friction contact points that “grab” onto the handle, holding it firmly without a latching mechanism. It is incredibly quiet during travel, eliminating the dreaded rattle against cabinet walls.
This product is ideal for smaller cabinet doors where you have limited room for mounting hardware. Its compact, rounded profile is less prone to snagging on clothing or other supplies as you reach into the cabinet. Itâs perfect for someone who values a quiet, low-profile storage experience.
Note that because it relies on friction rather than a mechanical lock, it performs best with smooth, uniform handles. If your broom handle is highly textured or tapered significantly at the top, it may slide out over time. When used with standard, smooth-handled tools, it provides a secure and elegant hold.
Berry Ave Organizer: Most Secure Screw-In Pick
The Berry Ave Organizer is for the RVer who has experienced the frustration of items flying off the walls during a bumpy road trip. While it can be mounted with adhesive, it features dedicated screw holes for a permanent, mechanical bond. This is the only way to guarantee that your broom stays exactly where you put it, regardless of road conditions.
This organizer is heavy-duty and built to handle the weight of multiple items simultaneously. If you have a dedicated tall-cabinet door, mounting this creates a comprehensive cleaning station. It is the professional choice for those who do not want to worry about equipment shifting during transit.
When using this, always opt for the provided hardware and ensure your screws are of the appropriate length for your door thickness. While it is less “mobile-friendly” regarding future changes, the security it provides is unmatched. If you want the most robust and permanent storage solution available, this is the gold standard.
Adhesive vs. Screws for RV Interior Walls
Choosing between adhesive and mechanical fasteners is a classic RV dilemma. Adhesive is convenient and preserves the integrity of thin wood, but it can fail under the extreme heat of a parked RV in summer. It is best used for lightweight items where failure results only in a minor annoyance rather than damage.
Screws provide absolute security, but they introduce the risk of “poking through” the other side of thin cabinet doors. You must check the back of your cabinet door before drilling to ensure the screw won’t be visible from the room side. Once a hole is drilled, there is no going back, so double-check your alignment.
For most cabinet door applications, a hybrid approach often works best: use a heavy-duty mounting tape to position the item, then add a single small screw if the load is significant. This minimizes the footprint while maximizing security. Always consider the vibration of the vehicle before deciding on a mounting method.
How to Install on Thin RV Cabinet Doors
Most RV cabinet doors are made of lightweight materials, often hollow-core or thin plywood, which makes them susceptible to splitting. Before installing any screw-in mount, use a drill bit slightly smaller than the shank of your screw to create a pilot hole. This prevents the wood from “tearing” or cracking as the screw enters.
If you choose adhesive, your prep work determines 90% of the success. Use an alcohol wipe to remove all traces of oil, dust, and wax from the cabinet door. Even if the door looks clean, residue from interior cleaning products can cause an adhesive to fail within a week.
Always apply pressure for at least 30 seconds after mounting, and wait at least 24 hours before hanging the broom. This allows the adhesive to cure fully to the porous or laminated surface. Rushing this step is the most common cause of premature bond failure.
Best Placement to Avoid Slides and Snags
When placing your broom holder, prioritize the “swing zone” of the cabinet door. Mount the holder on the side of the door furthest from the hinges to reduce the amount of torque the door experiences when opened. You want the broom to sit vertically and securely without hitting the interior shelves.
Check for “interior snag points” where the broom might catch on a shelf edge as the door closes. If your broom has a bulky head, position the holder so the head rests on the floor of the cabinet rather than hanging in the air. This takes the load off the bracket and prevents the handle from whipping around during transit.
Consider the ergonomics of the space; don’t mount the broom so high that you have to reach awkwardly to unclip it. Ideally, the grip should be at chest height for the average adult. A well-placed broom shouldn’t just be out of the way; it should be intuitive to grab and stow.
Beyond Brooms: Other Uses for These Grippers
These grippers are versatile tools that deserve a place in every RV drawer, regardless of broom storage needs. They are perfect for holding flashlights, fly swatters, or even shower squeegees in the bathroom. By utilizing the vertical space on the inside of cabinet doors, you free up valuable horizontal surface area.
You can also use these in the garage or basement compartment to keep hoses, cables, or fishing rods from tangling. Their ability to hold odd-shaped objects makes them better than traditional hooks for securing loose gear. Think of these as “universal anchors” for anything that has a long, cylindrical handle.
The goal is to maintain a clutter-free environment that promotes ease of movement. By repurposing these grippers in various parts of your rig, you create a system where every tool has a defined, secure home. This discipline of organization is what separates a cramped, stressful RV from a functional and peaceful home.
Properly securing your broom is a small but vital detail that drastically improves the flow of a small space. By choosing the right holder for your specific door type and storage needs, you effectively reclaim floor space and reduce the noise of a rattling interior. Focus on solid mounting and intentional placement, and you will find that even the smallest RV can feel remarkably spacious.
Frequently Asked Questions (FAQs)
What is a broom holder for RV cabinet doors?
A broom holder for RV cabinet doors is a compact clip or clamp that mounts flush against interior door panels to store cleaning tools off the floor. Most models use spring-loaded rubber rollers or silicone grips that hold handle diameters ranging from 0.75 to 1.25 inches. Because recreational vehicle cabinets use thin engineered wood, these holders are lightweight and usually mount with damage-free adhesive backing.
What does a rolling ball broom gripper do inside a compact camper?
Rolling ball broom grippers use gravity and grooved rubber spheres to lock broom handles tightly in place against sudden vehicle movements. When you push a handle upward into the slot, the internal ball drops slightly and wedges against the shaft. This mechanical friction prevents brooms from sliding downward over road bumps, yet lets you release the tool instantly by lifting the handle slightly.
How do I install a broom holder on an RV cabinet door without screws?
Installing a broom holder without screws requires cleaning the cabinet door with isopropyl alcohol and applying heavy-duty waterproof foam mounting strips. Wipe down the interior cabinet face to remove cooking grease and dust, then let the surface dry completely. Press Command picture hanging strips or 3M VHB tape firmly against the mount for 30 seconds. Wait at least 24 hours before hanging your broom to allow the adhesive bond to reach full strength.
How do you remove an adhesive broom mount from a delicate camper cabinet?
Soften the mounting tape adhesive with warm air from a handheld hairdryer set on low heat for about 60 seconds. Gently wiggle dental floss or strong fishing line behind the plastic bracket to slice through the softened foam tape. Once the mount pops off, roll away any residual adhesive using your thumb and a small splash of mineral oil, which protects the thin wood veneer from peeling or discoloration.
Clamp style vs friction grip broom holders: which works best in moving travel trailers?
Mechanical clamp broom holders secure items more reliably than friction grips in travel trailers because spring tension prevents tool dislodgement during transit. Passive friction slots rely solely on rubber drag, which can lose traction as ambient camper temperatures rise and soften the rubber. Heavy-duty clamp holders with steel springs squeeze the broom handle constantly, keeping mops and brooms locked in place even across washboard dirt roads.
How many broom holders can you fit on a standard 24-inch RV cabinet door?
Two broom holders fit comfortably side by side on a standard 24-inch tall by 12-inch wide RV cabinet door panel. Allow at least 4 inches of horizontal space between tool heads so dustpans, brooms, and dusters do not collide when the door shuts. Measure your cabinet depth first to ensure the broom handle diameter and bracket depth do not hit internal shelving when closed.
Why do adhesive broom clips fall off RV cabinet doors in hot weather?
Extreme indoor heat liquefies synthetic rubber adhesives on RV cabinet doors, causing heavy broom clips to slip down the slick laminate surface. Closed campers parked in direct sun frequently exceed 110 degrees Fahrenheit, which breaks down standard craft adhesives. Replace failing stickers with structural acrylic foam tape rated up to 150 degrees Fahrenheit, such as 3M VHB 4910, to maintain grip through seasonal temperature swings.
Is a cabinet door broom holder worth it for tiny teardrop trailers with minimal clearance?
Compact cabinet door broom holders are well worth purchasing for teardrop trailers because vertical door storage frees up precious under-bed cargo space. Teardrop trailers rarely have standalone utility closets, so mounting a broom against a galley or under-counter door tucks long tools out of sight. Just verify that your door has at least 2 inches of interior void space so the holder clears adjacent cookware.
