8 Best Tablet And Screen Mounts For Camper Van Galleys

Preparing a meal in a cramped camper van galley while trying to read a recipe or watch a video is a recipe for spilled ingredients and a cracked screen. Without a dedicated, secure mounting solution, your expensive tablet is constantly at risk of sliding off the counter or getting splashed with grease. Investing in a high-quality, vibration-resistant mount transforms your galley into a highly functional, dual-purpose digital workstation.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Key Factors for Choosing a Van Galley Mount

Mobile living demands gear that can handle both static use and high-vibration travel. When selecting a galley mount, the primary considerations are vibration dampening, range of motion, and stowability. A mount that sags while driving on washboard dirt roads will quickly fatigue its joints, leading to a dropped device or damaged cabinetry.

You must also evaluate how much space the mount occupies when it is not in use. In a tiny kitchen, every square inch of clearance matters, meaning a bulky arm that cannot fold flat against a wall or tuck under a cabinet will constantly get in the way of meal prep. Look for systems with mechanical locking pins or robust tension adjustments that prevent unwanted swinging during transit.

Finally, consider the mounting footprint and the material of your van’s interior walls. Lightweight plywood panels or composite laminates cannot support heavy, cantilevered loads without proper reinforcement. Make sure the mount’s base spreads the load effectively or can be securely bolted through to structural framing or solid cabinetry.

How to Securely Install Mounts on RV Cabinets

Standard RV cabinetry is notorious for being made of thin, lightweight materials like 1/4-inch plywood or hollow-core pressboard. Screwing a heavy-duty tablet mount directly into these flimsy panels is a recipe for stripped screws and structural failure. To ensure a lifetime of rattle-free service, you must anchor the mount using through-bolts and backing plates rather than simple wood screws.

Start by locating a solid-wood frame member inside the cabinet, or fabricate a custom backing plate out of 1/2-inch birch plywood or aluminum sheet metal. Sandwich the cabinet wall between the mount’s base on the outside and your backing plate on the inside, securing them with nylon-locking nuts (Nyloc) that will not back out from road vibration.

If you are mounting underneath an upper cabinet, ensure the fasteners do not protrude into the usable storage space where they can snag dry goods or dishes. Applying a small bead of polyurethane adhesive (like 3M 5200) between the mount base and the cabinet face can also distribute shear loads and completely eliminate microscopic squeaks while driving.

Articulating Wall Mount – Mount-It! MI-751

An articulating wall mount serves as the permanent backbone of a multi-functional van layout, bridging the gap between your cooking space and your living or sleeping area. This type of mount allows you to swing a tablet or small monitor out for easy viewing while standing at the stove, then pivot it toward the swivel seats or bed for evening entertainment.

The Mount-It! MI-751 is the ideal pick for this task due to its incredibly low profile and rugged, all-metal construction. When collapsed, it holds your screen just 1.5 inches from the wall, yet its single-arm design extends up to 13.5 inches with full 180-degree swivel capabilities.

• VESA Compatibility: 75x75mm and 100x100mm patterns
• Weight Capacity: Supports up to 44 lbs (highly overkill for tablets, ensuring zero sag)
• Material: Heavy-duty die-cast aluminum
• Tilt Range: 15 degrees up and down to eliminate glare from galley windows

Before committing, understand that this is a semi-permanent installation requiring drilling. It does not include a dedicated tablet clamp out of the box, so you will need to pair it with a VESA-compatible tablet adapter. It is best suited for van lifers who want a permanent, rock-solid screen station that can handle heavy use without wearing out.

This mount is perfect for builders with solid wood or reinforced bulkhead walls who want a dual-purpose galley-to-bedroom screen setup. It is not ideal for those renting their vans or anyone seeking a drill-free, highly temporary mounting solution.

Under Cabinet Mount – CTA Digital PAD-UCM

When counter space is at an absolute premium, the space directly beneath your upper cabinets is prime real estate. An under-cabinet mount suspends your tablet at eye level, keeping it completely clear of flour, water, and hot oil splashes while you work. When dinner is served, a good under-cabinet arm folds completely flat out of sight.

The CTA Digital PAD-UCM excels here because of its highly clever, dual-purpose design. It features a quick-release slide-on mounting base that mounts under your cabinet, but it also includes weighted legs so you can slip it out of its bracket and use it as a tabletop stand on a picnic table.

• Holder Range: Adjusts to fit tablets between 6 and 8.75 inches wide
• Rotation: 360-degree holder for portrait or landscape orientation
• Joints: Multiple auto-locking joints for customizable angles
• Footprint: Small under-cabinet bracket that minimizes lost storage space

The arm’s joints must be tightened occasionally using the included Allen wrench to prevent sagging over time, especially if you drive on bumpy forest service roads. Also, ensure your upper cabinet’s bottom lip is deep enough to hide the folded assembly if you want a completely flush, hidden look.

This is the ultimate option for culinary-focused van lifers who actively cook with digital recipes and need their counter space completely unencumbered. It is less suitable for those with high ceilings or no upper galley cabinetry.

Magnetic Tablet Mount – Scosche MagicMount Pro XL

If you prefer a minimalist aesthetic with zero bulky arms cluttering your galley, a magnetic mount is the answer. It allows you to slap your tablet onto a wall plate instantly and pull it off just as fast when you need to step outside. It provides the quickest mounting and dismounting workflow of any design on the market.

The Scosche MagicMount Pro XL features extra-powerful Neodymium magnets that are specifically designed to hold larger, heavier tablets securely in high-movement environments. The surface is rubberized to prevent slipping, and the marine-grade adhesive backing holds fast even in high-heat galley environments.

• Magnet Type: 100% safe, extra-strong Neodymium magnets
• Mounting Plates: Includes large and small MagicPlates with 3M adhesive
• Profile: Extremely low-profile, raising less than half an inch off the wall
• Compatibility: Works with virtually any tablet or smartphone

You must adhere a thin metal plate directly to the back of your tablet or its case, which can occasionally interfere with Qi wireless charging if placed incorrectly. While the magnets are incredibly strong, this mount does not offer angle adjustments, so you must mount it at the exact viewing height and angle you plan to use.

This is best for minimalist builders who want a clean, almost invisible mounting solution and are content with a fixed viewing angle. Avoid this if you need to pivot your screen to avoid glare or want to use your tablet with a thick, heavy rugged case.

Heavy Duty Arm Mount – Ram Mounts RAM-B-101U

For those who venture deep into the backcountry, standard consumer-grade plastic mounts will quickly snap or sag under the relentless vibration of corrugated dirt roads. A heavy-duty, industrial-grade arm mount isolates your device from these harsh vibrations and guarantees your screen stays exactly where you set it, no matter the terrain.

The Ram Mounts RAM-B-101U is the gold standard for rugged durability, utilizing a patented rubber ball-and-socket design. This system not only provides near-infinite adjustability but also acts as a shock absorber, dampening the high-frequency road vibrations that can damage internal tablet electronics.

• Ball Size: B Size (1-inch diameter) rubber ball joints
• Material: Marine-grade, powder-coated aluminum
• Length: Overall length of 5 inches with a standard double socket arm
• Weight Capacity: Up to 2 lbs under rugged, off-road conditions

This is a modular system, meaning you will need to purchase the tablet-specific holder (such as the RAM Tab-Tite or X-Grip) separately to complete the setup. The industrial look is very utilitarian, which might clash with soft, cozy, or modern organic van interior aesthetics.

This mount is indispensable for off-road overland builds and 4×4 camper vans that frequently tackle rough trails. It is overkill for weekenders who stick strictly to paved highways and prefer a more integrated, domestic look.

Gooseneck Mount – Lamicall Gooseneck Tablet Holder

When your galley layout has awkward angles or limited flat mounting surfaces, a flexible gooseneck mount provides the ultimate positioning freedom. It allows you to snake the screen around cabinet corners, light fixtures, or window frames to position the tablet exactly where you need it, then tuck it away when finished.

The Lamicall Gooseneck Tablet Holder stands out because it utilizes a dual-section arm: a rigid aluminum alloy section for structural stability and a flexible leather-wrapped section for easy adjustments. This unique construction minimizes the “bouncy” effect common in cheaper, fully flexible goosenecks.

• Overall Length: 38.6 inches (98 cm) for maximum reach
• Clamp Range: Attaches to surfaces up to 2.75 inches thick
• Tablet Clamp: Fits devices from 4.7 to 10.5 inches
• Protection: Silicone-padded clamp ends prevent scratching on van cabinetry

Because of its long reach, this mount will experience significant bounce while the vehicle is in motion if it is left extended. You must either clamp it down flat or remove the tablet and stow the gooseneck before hitting the road to prevent damage to the clamp point.

Ideal for users with complex, non-standard galley layouts who need to clamp their mount to a shelf lip or table edge and bend the screen around obstacles. It is not suitable for those looking for a permanent, vibration-free setup during active transit.

Suction Cup Mount – SeaSucker Naked Flex Mount

If you want a mount that can transition from the interior galley wall to the exterior of your van for outdoor cooking, a high-performance suction mount is unmatched. It allows you to turn any smooth surface—like a glass window, fiberglass high-top, or acrylic backsplash—into a temporary, drill-free workstation.

Unlike cheap consumer suction cups that fail when the temperature drops, the SeaSucker Naked Flex Mount uses a professional-grade vacuum cup with an integrated pump. A built-in indicator band warns you if the cup loses vacuum pressure, allowing you to pump it back up before it loses grip.

• Pull Strength: Rated for a massive 120 lbs of pull strength
• Cup Diameter: 4.5 inches non-marking vacuum cup
• Arm: 7-inch flexible aluminum core arm
• Attachment: Uses a heavy-duty mechanical locking system

The mounting surface must be completely non-porous, clean, and smooth; textured camper van wall panels or unfinished wood will not hold a vacuum. The vacuum cup requires occasional cleaning and lubrication to maintain its sealing properties, making it a slightly higher-maintenance option.

This is perfect for van lifers who love outdoor cooking and want to attach their tablet to the outside sliding door or exterior windows. It is not designed for permanent mounting on typical interior wood cabinetry.

Drill-Free Clamp Mount – Arkon TAB086-12

For renters, those testing out layouts, or builders who dread drilling holes into expensive custom cabinetry, a heavy-duty clamp mount is the ideal compromise. It secures tightly to existing structures like shelves, table legs, or partition walls, offering robust stability without leaving a permanent mark.

The Arkon TAB086-12 features a highly robust C-clamp base made of heavy-duty aluminum that grips round, flat, or square surfaces up to 2 inches thick. Combined with a 12-inch adjustable neck, it provides a stable platform that can be locked down tight using integrated wing nuts.

• Neck Length: 12 inches of rigid aluminum multi-angle arm
• Clamp Range: Clamps onto surfaces from 0.5 to 2 inches wide
• Universal Holder: Fits tablets with screen sizes from 9 to 12 inches
• Swivel: 360-degree rotation at both the head and the base

The C-clamp is quite bulky and requires a clear lip on your cabinet or shelf to mount securely. While it is temporary, the pressure from clamping can mark soft woods like cedar or pine, so placing a small rubber pad or felt strip between the clamp jaws and the wood is highly recommended.

Excellent for renters, temporary builds, or those who want to move their mount between the galley, the driver’s cab, and the rear bed. It is not the right choice for ultra-sleek, built-in aesthetics where you want all mounting hardware hidden.

Multi-Joint Mount – AboveTEK Elegant Utility Stand

A multi-joint mount offers the best of both worlds: a stable, stationary base with multiple articulating pivots that allow you to fold the screen flat against the wall, angle it down toward a low countertop, or raise it up for standing use. It maximizes ergonomic comfort by allowing micro-adjustments for different user heights.

The AboveTEK Elegant Utility Stand features a premium aluminum alloy frame with three high-tension joints that mimic the fluid motion of high-end office monitor arms. It includes two interchangeable brackets to accommodate both phones and large tablets, making it highly versatile for mixed-device households.

• Material: High-grade aircraft aluminum and durable polymer
• Mounting Options: Includes wall mount bracket and a weighted desktop base
• Angle Range: 360-degree rotation with 180-degree folding joints
• Device Fit: Fits screens from 4 to 14 inches (including iPad Pro)

The high-tension joints require occasional adjustment with the included hex key to match the weight of your specific device. If the joints are too loose, a heavy tablet will slowly droop, but if they are too tight, adjusting the angle on the fly becomes difficult.

This is the perfect choice for tech-heavy vans where multiple people of varying heights share the galley workspace. It is less suitable for minimalist builds where a simple, single-pivot mount would suffice.

Preventing Screen Vibration While Driving Off-Road

Off-road trails, washboard gravel roads, and even standard highway expansion joints can subject your camper van’s interior to continuous, damaging vibrations. When a tablet mount is extended, these vibrations are amplified, putting immense leverage on the mounting brackets and potentially cracking your cabinet panels. To prevent this, never drive with a heavy mount fully extended; always fold the arm flat against its mounting surface to minimize the lever arm effect.

Implementing simple vibration-dampening hacks can save your hardware and your sanity by eliminating persistent rattles. Placing a small strip of high-density foam or adhesive neoprene tape behind the mount where it contacts the wall provides a soft landing pad that absorbs movement. Additionally, using a heavy-duty elastic strap or silicone band to wrap around the tablet and its mounting arm while in transit adds an extra layer of security.

Finally, perform regular hardware checks as part of your pre-trip departure routine. Road vibrations naturally loosen threaded fasteners over time, meaning even lock washers can eventually back off. Make it a habit to check the tightness of your mounting bolts and tension joints every few weeks to catch loose hardware before it leads to a dropped device.

Matching Mount Mechanics to Your Galley Workflow

Your daily cooking habits and van layout should ultimately dictate the mechanical style of the mount you choose. If your galley is a tight, single-corridor space where you frequently move back and forth, a flush-mounted magnetic system or a fold-away under-cabinet design keeps the walkway completely unobstructed. On the other hand, if you enjoy prepping meals while looking out your open sliding door, an articulating arm that can pivot 180 degrees is essential.

Consider the power needs of your device during use as well. A mount that blocks the charging port of your tablet, or places the device too far from your 12V USB outlets, will lead to messy cords draped across hot stoves or wet sinks. Position your mount close to a dedicated charging port, and use adhesive cord clips to route your charging cables cleanly along the underside of your cabinets.

Ultimately, the best mount is one that integrates seamlessly into your living space without requiring you to change how you move within your van. By matching the mechanical features of your mount to your specific kitchen layout, you ensure a safe, efficient, and highly enjoyable off-grid cooking experience.

Conclusion

Selecting the right tablet mount elevates your camper van galley from a simple cooking area into a highly functional, modern living space. Whether you prioritize the rugged durability of a Ram Mount or the space-saving cleverness of an under-cabinet design, securing your tech ensures it is always ready to assist with recipes, navigation, or entertainment. Secure your mount, prep your favorite meal, and enjoy the seamless utility of a well-organized mobile home.