8 Best Campervan Dashboard and Floor Console Organization Solutions for Full-Time RVers

Driving a campervan across the country means the cockpit serves as both an office and a navigation center while on the move. When every square inch of a mobile home must pull double duty, a cluttered dashboard or disorganized center console quickly leads to driver distraction and lost items. Investing in the right cab organization gear turns a chaotic front seat into a highly functional, stress-free command center.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Maximizing Cab Space in a Full-Time Campervan

The front cab of a campervan is more than just a driving compartment; it is the entry point, the navigation hub, and often part of the living room when swivel seats are turned around. In a full-time rig, items like sunglasses, charging cords, fuel cards, and national park passes need designated homes so they do not end up lost under seats or rattling on the floorboards. Proper space optimization here ensures that safety is not compromised by loose objects sliding around during sudden stops.

Maximizing this space requires utilizing overlooked surfaces like the sun visors, the vertical space between seats, and the deep, dark abyss of factory center consoles. By treating the cockpit as a high-density storage zone, drivers can keep essential items within arm’s reach without sacrificing passenger legroom or blocking vital visibility through the windshield. It is about creating a system where every tool has a locked-down, predictable location.

Key Factors in Cab and Console Organization

When selecting storage solutions for a campervan cab, durability and vibration resistance are the most critical factors. Cheap plastic bins will rattle incessantly on washboard roads, driving occupants crazy over long highway stretches. Look for products that utilize soft-touch silicone, tight-fitting interlocking pieces, or heavy-duty fabric that dampens sound.

Another major consideration is accessibility while driving. A driver should never have to take their eyes off the road to dig for an auxiliary cord or a toll pass. Items must be positioned intuitively, requiring only blind muscle memory to retrieve. Furthermore, secure mounting mechanisms are non-negotiable; anything sitting on the dash or floor must remain firmly anchored during sharp turns and emergency braking maneuvers.

Console Organizer – Salex Organizers OCD Tray

Deep center consoles are notorious black holes where small items get buried. An organizer tray divides this cavernous space into usable compartments, preventing the bottom of the bin from becoming a graveyard for loose change, pens, and charging cords. It establishes structure in a space that vehicle manufacturers often leave as an empty plastic bucket.

The Salex Organizers Vehicle OCD (Organized Console Device) offers custom-fit, high-grade ABS plastic grids and top trays that transform deep factory consoles into multi-tiered filing systems. The thick plastic dividers interlock perfectly without glue or tools, creating a rattle-free structure that matches the exact shape of the vehicle’s interior. This design allows for quick access to daily essentials on the top tier while leaving bulkier items protected underneath.

• Material: High-grade ABS plastic (0.125-inch thick)
• Fit: Vehicle-specific designs (Ford Transit, Mercedes Sprinter, Ram Promaster, etc.)
• Installation: Interlocking pieces, tool-free assembly
• Best Use: Categorizing loose gear like multi-tools, charging cables, and documents

Buyers must match the exact year, make, and model of their van, as these are precision-molded and not universal. Because they sit snugly, accessing the very bottom of the console requires lifting the top tray out, so bottom-tier storage should be reserved for rarely used items like vehicle registration or spare fuses.

This product is excellent for those who want to turn a messy, deep armrest console into a structured filing cabinet. It is not ideal for those with custom aftermarket center consoles or minimalist rigs that lack a deep factory storage bin.

Floor Trash Can – High Road TrashStash Hanging Bag

Trash accumulates fast on long road trips, and loose grocery bags slide around, spill, and look unsightly. A dedicated, leak-proof floor trash can keeps waste contained and off the floorboards, preserving the clean look of the living space. It is a simple utility that dramatically improves daily quality of life on the road.

The High Road TrashStash features a compact hanging design with a quick-release buckle that attaches securely to the back of the center console or passenger seat headrest. It offers a three-gallon capacity and a leak-proof, wipe-clean liner that handles coffee cups and food wrappers without dripping onto the van floor. The unique hook-and-loop top seal keeps garbage out of sight and seals in odors.

• Capacity: 3 gallons (11.4 liters)
• Material: 500D packcloth with a leak-proof vinyl liner
• Mounting: Heavy-duty adjustable strap with quick-release buckle
• Best Use: Containing wet and dry vehicle trash securely on the go

Because it hangs, it takes up a small amount of footwell space or walk-through clearance depending on where it is mounted. In vans with swivel seats, placement must be carefully planned so it does not block the rotation of the chairs when transitioning into camp mode.

This hanging bag is perfect for vanlifers who drink coffee and eat meals on the go and need a secure, leak-proof bin that won’t tip over. It is not ideal if the walkthrough path between the front seats must remain completely clear at all times.

Dash Multi-Mount – Bulletpoint Rubigrid Platform

Dashboards hold GPS units, phones, backup camera monitors, and tablets. Standard suction cups fail in extreme heat and rattle loose on rough terrain, making a hard-mounted dash platform essential for any off-grid campervan. A solid mounting system keeps navigation screens steady and within the driver’s natural line of sight.

The Bulletpoint Rubigrid Platform is a heavy-duty, vehicle-specific metal mounting base that screws directly into the dash bezel. It features a grid pattern allowing for the attachment of multiple ball mounts, securing phones, action cameras, and tablets simultaneously. The all-metal construction eliminates flexing, ensuring devices remain completely still even on the roughest washboard tracks.

• Material: Laser-cut steel mounting base with carbon fiber/kevlar blend arms
• Compatibility: Specific truck and van dashboard bezels
• Device Capacity: Up to 4 devices simultaneously (phones, tablets, GPS)
• Best Use: Heavy-duty off-road navigation mounts

Installation requires drilling into the factory dash plastic in most van models, which might intimidate some owners. It also raises the profile of mounted devices, so users must carefully position mounts to avoid blocking the driver’s forward field of view through the windshield.

This mounting platform is ideal for overland travelers, digital nomads, and drivers who rely on multiple screens for off-grid navigation. It is not suited for those who want a damage-free, temporary mounting solution that leaves no trace upon removal.

Front Seat Organizer – Lusso Gear Car Organizer

Keeping clipboards, logbooks, tablets, and water bottles within reach of the driver’s seat prevents clutter from piling up on the passenger seat. When traveling solo or managing a mobile office, a front seat organizer acts as a co-pilot, keeping files and tech secure and accessible.

The Lusso Gear Car Organizer sits flat on the passenger seat or hangs from the headrest, featuring reinforced side walls that prevent it from collapsing. It includes adjustable compartments, mesh side pockets, and pen holders, providing a stable home for mobile office gear. A built-in seatbelt strap secures the entire unit so it will not slide off the seat during sudden braking.

• Material: Oxford 600D fabric with reinforced siding
• Dimensions: 18″ x 10″ x 9″
• Security: Seatbelt anchor strap to prevent sliding
• Best Use: Storing clipboards, laptops, water bottles, and files on the passenger seat

If a passenger frequently rides in the front, this organizer must be easily moved to the back, which is made simple by its built-in carry handles. However, it takes up a full seat footprint when in use on the cushion, which can be inconvenient in smaller van layouts.

This organizer is great for solo van dwellers who use their passenger seat as a mobile office desk. It is not suitable for couples who constantly travel with both front seats occupied, unless they plan to hang it permanently on the back of a seat.

Non-Slip Dash Mat – IPELY Silicone Car Dashboard Pad

A non-slip mat provides a temporary landing zone for keys, sunglasses, and loose coins on top of the dash without them sliding into the windshield defroster vents. It is a low-cost, low-profile solution that utilizes empty dashboard surface area without permanent modifications.

The IPELY Silicone Car Dashboard Pad uses a high-grade, adhesive-free sticky silicone that grips the dashboard surface securely without leaving sticky residue. It features a raised border to corral small items and a built-in slot to hold a phone horizontally for quick GPS viewing. It is highly resistant to UV rays and extreme heat, meaning it won’t melt or warp in direct summer sunlight.

• Material: Eco-friendly, non-toxic, heat-resistant silicone
• Dimensions: 11″ x 7″
• Grip Type: Adhesive-free sticky vacuum suction
• Best Use: Holding sunglasses, keys, and phones on flat dash areas

Over time, dust, pet hair, and road lint will coat the sticky surface, reducing its grip. Cleaning is simple, requiring only a quick rinse with warm, soapy water to restore its original tackiness. The pad also requires a flat or slightly curved dashboard surface to sit properly, so highly angled dash designs may limit placement options.

This pad is perfect for quick-access items like toll cards and sunglasses that need a temporary, silent home while driving. It is not meant for securing heavy items or devices on steep off-road climbs.

In-Console Safe – Console Vault Heavy Duty Safe

Campervans are targets for break-ins, and leaving passports, spare cash, or spare keys in a standard glovebox is highly risky. An in-console safe secures valuables directly to the vehicle’s frame, offering a high-security lockbox that is hidden from plain view.

The Console Vault Heavy Duty Safe is constructed from heavy-gauge cold-rolled steel and is precision-engineered to fit inside the factory console. It features a drill-resistant lock mechanism and secure mounting bolts that anchor directly to the van’s existing floor mounts. It maximizes the interior volume of the console while providing bank-grade security without taking up living area space.

• Material: 12-gauge cold-rolled plate steel
• Lock Type: 3-digit combination lock or high-security key
• Installation: Direct bolt-on inside factory console using existing holes
• Best Use: Securing passports, cash, and backup hard drives

This safe adds significant weight to the center console and requires some basic hand tools for installation. Because it occupies the upper half of the console space, it limits general, quick-access storage for everyday items, forcing a trade-off between security and convenience.

This product is essential for full-timers carrying high-value gear, spare cash, or sensitive travel documents who want peace of mind when leaving their rig unattended. It is not necessary for those who already have a bolted-down safe in the rear living area.

Sun Visor Organizer – OneTigris Tactical Panel

Sun visors represent prime vertical real estate that is often underutilized. A visor organizer keeps registration papers, pens, tire pressure gauges, and pocket knives instantly accessible, clearing out clutter from the glove box.

The OneTigris Tactical Visor Panel is constructed from 1000D Nylon and features heavy-duty hook-and-loop straps that wrap tightly around almost any large van visor. It uses a MOLLE-compatible webbing system alongside elastic loops, allowing users to customize their gear layout precisely. The stiffened backing plate ensures the panel remains flat against the visor without sagging over time under the weight of tools.

• Material: 1000D Nylon with a stiff internal board
• Dimensions: 11.8″ x 6.3″
• Attachment: Fully adjustable hook-and-loop straps
• Best Use: Storing penlights, glass breakers, vehicle registration, and small pocket tools

Overloading the panel can cause the sun visor to swing down unexpectedly under heavy acceleration or rough terrain. Keep the items mounted here relatively lightweight, focusing on flat tools and paperwork rather than heavy metal gear.

This panel is excellent for organized drivers who like tactical-style customization and want quick access to small tools and identification documents. It is not ideal for those who prefer clean, minimalist aesthetics in their cab.

Cup Holder Expander – WeatherTech CupCoffee Mount

Factory cup holders in vans are often designed for standard soda cans, which fails to accommodate the large, insulated water bottles and thermal mugs that full-timers rely on. A cup holder expander bridges this gap, preventing top-heavy bottles from tipping over on sharp turns.

The WeatherTech CupCoffee Mount features an adjustable base that expands to fit securely into almost any standard cup holder. The upper cup portion is oversized and features a deep cutout to accommodate large mug handles and wide-base bottles like 32 oz Hydro Flasks or Yetis. Made from high-quality, impact-resistant polymer, it remains stable without tipping or rattling even when holding a heavy, full bottle.

• Material: Impact-resistant polymer compound
• Compatibility: Fits standard cup holders from 2.5″ to 3.75″ in diameter
• Cup Compatibility: Holds large mugs with handles up to 32 oz size
• Best Use: Stabilizing large thermal travel mugs and insulated water bottles

Because of its size, it can block adjacent dashboard controls, radio screens, or secondary cup holders depending on the van’s layout. Measure the clearance around the existing cup holders before purchasing to ensure it won’t impede gear shifters or climate dials.

This mount is a must-have for coffee enthusiasts and hydration-focused travelers who use heavy, insulated mugs and bottles. It is not needed if you stick to standard-sized beverage cans or small water bottles.

How to Secure Console Gear for Rough Off-Road Travel

Driving off the beaten path to reach remote BLM campsites exposes a campervan to violent shaking and vibrations. Unsecured items in the cab can quickly turn into dangerous projectiles or, at the very least, create an annoying chorus of rattles. To prevent this, use adhesive-backed neoprene foam tape inside hard plastic storage trays to dampen noise and prevent items from sliding.

For larger items on the floor, utilize heavy-duty bungees, cam straps, or hook-and-loop fasteners anchored to factory seat bases or floor D-rings. Never rely on friction alone to hold items in place when tackling washboard roads. Ensuring that every piece of gear is mechanically fastened or tightly packed not only protects the vehicle’s interior but also reduces driver fatigue caused by continuous environmental noise.

Maintaining a Clutter-Free Cockpit on the Road

In a full-time campervan, the transition from “driving mode” to “living mode” happens daily. If the cab is cluttered with maps, half-empty water bottles, and receipts, rotating the front seats to face the living area becomes a frustrating chore of moving piles of debris. Developing a strict “clean-as-you-go” routine at the end of every driving stint keeps the space functional and welcoming.

Dedicate the final five minutes of every drive to clearing out trash, wiping down surfaces, and returning devices to their designated storage mounts. This simple habit ensures that when the engine is turned off, the front seats are ready to immediately integrate into the living space. A tidy cockpit fosters a calm mind, making the transition to camp relaxing and seamless.

Organizing a campervan cockpit is not just about aesthetics; it is about creating a safe, functional, and stress-free environment for the journey ahead. By investing in targeted storage solutions like secure dash mounts, custom console dividers, and rugged visors, full-time RVers can protect their gear and focus on the road. Take the time to dial in the front cab, and every mile of the adventure will feel significantly more comfortable.