8 Best Tablet Mounts for Mounting in a Camper Bunk Bed

Fitting entertainment into a cramped camper bunk bed often feels like solving a high-stakes puzzle where every inch of clearance counts. Holding a heavy tablet overhead while trying to wind down is a recipe for dropped screens and fatigued arms. Choosing the right dedicated tablet mount transforms these tight quarters into a cozy, hands-free personal theater without sacrificing precious sleeping space.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Maximizing Small Spaces in Camper Bunk Beds

RV bunk beds are notoriously tight, often offering less than two feet of vertical clearance between the mattress and the ceiling or upper bunk. In these micro-environments, traditional tablet stands are useless because there are no flat bedside tables. Mounting the screen directly to the wall, ceiling, or bunk frame is the only way to keep the mattress area clear for sleeping and sitting.

A permanent or semi-permanent mount also solves the safety hazard of loose electronics during transit. Unsecured tablets can slide off beds, crack on hard laminate flooring, or become dangerous projectiles when navigating bumpy dirt roads. Elevating the device keeps it safe, accessible, and positioned at an ergonomically correct viewing angle to prevent neck strain.

Key Factors for Selecting a Camper Tablet Mount

Standard household mounts are rarely designed to withstand the constant vibrations, sudden bumps, and temperature swings of a moving vehicle. When selecting a mount for a camper bunk, the primary considerations must be holding power and mounting versatility. You must assess whether the installation surface can support screws or if a damage-free adhesive solution is required due to thin luan plywood walls.

Adjustment range is equally critical in a tight bunk space where the viewer might be lying flat, propped up by pillows, or sitting cross-legged. Look for mounts that offer multi-axis rotation or quick-release mechanisms. This allows the tablet to be tucked completely flat against the wall when not in use, preserving every millimeter of physical and visual space.

Articulating Arm Mount – Mount-It! MI-753

The Mount-It! MI-753 is the go-to choice when you need a rigid, mechanical arm that can extend, tilt, and fold completely out of the way. It bridges the gap between a permanent fixture and a flexible viewing platform. Made of heavy-duty steel, it resists sag even when holding larger tablets on rough roads.

• Compatible screen sizes: 7 to 11 inches
• Rotation: 360 degrees for portrait or landscape viewing
• Extension range: Up to 15 inches from the wall
• Mounting interface: VESA 75x75mm base plate

Before buying, note that this mount requires solid blocking behind the RV wall or secure mounting into a wooden bunk frame stud. It is not suitable for paper-thin luan panels without backing support. This is the ideal option for dedicated entertainment setups where durability and maximum adjustability are the top priorities.

Gooseneck Clamp Mount – Lamicall Tablet Holder

For bunks with exposed wooden frames, safety rails, or metal ladders, the Lamicall Tablet Holder provides instant, drill-free positioning. The flexible gooseneck allows you to loop and bend the arm into highly unconventional angles to clear obstacles. Its heavy-duty clamp features protective rubber padding to avoid scratching the camper’s woodwork.

• Clamping range: Up to 3.14 inches wide
• Arm length: 38.6 inches of flexible gooseneck
• Device compatibility: 4.7 to 10.5-inch tablets and phones
• Material: Leather-wrapped aluminum alloy core

While incredibly versatile, goosenecks naturally suffer from slight bounce when the vehicle is in motion or if the bed moves. Users should coil the arm slightly to increase its rigidity. This mount is perfect for renters, kids’ bunks, or those who want to pack the mount away during travel days.

Under-Cabinet Ceiling Mount – Mount-It! MI-4211

When wall space is nonexistent, looking up to the ceiling or the underside of the top bunk is the smartest solution. The Mount-It! MI-4211 mounts directly to overhead horizontal surfaces, allowing the tablet to hang down at eye level. When movie night is over, the arm folds flat against the ceiling and locks in place with a satisfying click.

• Tilt range: 0 to 90 degrees
• Swivel range: 360 degrees
• Weight capacity: Up to 4.4 pounds
• Mounting footprint: Ultra-compact 4″ x 4″ base

Installation requires drilling upwards, so you must verify the thickness of the overhead bunk platform or ceiling structure to avoid piercing through the top side. Use short, coarse-thread wood screws or through-bolts if accessible. This is the ultimate choice for lower bunks with very narrow widths where side walls cannot be obstructed.

Rail Clamp Mount – Tackform Enterprise Mount

Bumpy dirt roads and off-grid trails will quickly loosen cheap plastic mounts. The Tackform Enterprise Mount utilizes an all-metal, industrial-grade rail clamp that locks onto bunk safety rails or ladder rungs like a vise. The dual ball-and-socket design allows for infinite micro-adjustments while remaining completely locked in place once tightened.

• Clamp fit: Fits round, square, or irregular rails from 0.625″ to 2″ wide
• Construction: CNC machined aerospace-grade aluminum
• Holder type: Spring-loaded, one-handed insertion cradle
• Vibration dampening: High-durometer rubber-molded components

This is a premium, heavy-duty option that commands a higher price tag than basic plastic mounts. However, it will not slip, droop, or rattle even on the roughest washboard roads. Choose this if you travel off-grid frequently and have an exposed wooden bunk rail or metal ladder to attach it to.

Damage-Free Wall Mount – Dockem Koala Mount 2.0

Many RV owners dread drilling holes into their pristine interior walls. The Dockem Koala Mount 2.0 solves this by using damage-free Command adhesive strips to mount two sleek brackets directly to the wall. It holds the tablet completely flush, acting like a low-profile picture frame that takes up zero physical space in the bunk.

• Mounting method: Damage-free 3M Command strips (included)
• Thickness limit: Fits devices up to 11mm or 13mm (with slim cases)
• Cord management: Built-in side clips to route charging cables
• Width adjustment: Set brackets at any distance to fit any tablet size

Because it holds the tablet flush against the wall, there is no tilt or swivel adjustment. It requires a flat wall surface directly in your line of sight. This mount is ideal for budget-conscious RVers, renters, or anyone looking for a clean, minimalist look with a five-minute, drill-free setup.

Magnetic Tablet Mount – Scosche MagicMount Pro XL

If you constantly move your tablet between the driver’s cab, the kitchen, and the bunk bed, a magnetic system is incredibly convenient. The Scosche MagicMount Pro XL uses powerful neodymium magnets to instantly grab and hold your device. You simply apply a thin metal plate to the back of your tablet or case, and touch it to the wall-mounted magnetic base.

• Magnet strength: 100% safe, extra-powerful neodymium magnets
• Footprint: Small, unobtrusive surface-mount base
• Adhesive: Automotive-grade 3M adhesive backing
• Compatibility: Universal for all tablets up to 2 pounds

The magnetic plate must be affixed directly to your tablet or its case, which can occasionally interfere with wireless charging on some devices. While the magnets are exceptionally strong, they are best suited for paved road travel; rough off-roading might jar a heavy tablet loose. This is perfect for those who prioritize rapid, one-handed mounting and a clutter-free bunk wall.

Strap Mount – TFY Universal Car Headrest Mount

Sometimes there are no flat walls or rigid rails, but there are vertical posts, cushions, or ladder rungs. The TFY Universal Car Headrest Mount utilizes a heavy-duty, adjustable velcro strap system that can wrap tightly around almost any cylindrical or rectangular object. It is incredibly lightweight, packable, and requires absolutely zero tools or adhesives.

• Strap material: High-grip, stretchable elastic velcro
• Holding mechanism: Soft silicone corners that won’t scratch screens
• Device range: 7 to 10-inch tablets
• Portability: Folds flat to fit in a pocket

This mount relies on having a structural element—like a bunk ladder, safety rail, or wrapped cushion—to loop around. It does not offer articulating adjustments, so your viewing angle is dictated by the angle of the mounting point. It is the perfect temporary, budget-friendly solution for kids’ bunk spaces or temporary road trips.

Heavy-Duty Drill Mount – Arkon Heavy Duty Mount

For a bulletproof, permanent installation that will survive years of rough travel, the Arkon Heavy Duty Mount is the gold standard. It features a solid aluminum 4-hole drill base that anchors permanently to your RV’s structural framing. The heavy-duty composite arm holds large, heavy tablets rock-solid without any of the vibration or sag common in lighter mounts.

• Base style: 4-hole AMPS pattern drill-down base
• Arm construction: 8-inch robust aluminum multi-angle arm
• Cradle capacity: Fits tablets with screen sizes up to 12.9 inches
• Rotation: 360-degree swivel joint at both ends

This mount is a permanent commitment that requires drilling four holes into your camper’s woodwork or metal framing. It is highly recommended to use a backing plate or anchor into solid studs to distribute the load. This is the ultimate mount for full-time RVers who want a premium, indestructible setup that never needs to be babied.

How to Securely Install Mounts on RV Walls

RV walls are notorious for being incredibly thin—often consisting of a 1/8-inch luan plywood panel over a hollow aluminum or wood frame filled with foam insulation. Standard drywall anchors will quickly pull right out of these walls under the leverage of a heavy tablet arm. To ensure a secure installation, always use a stud finder to locate the internal structural framing before drilling.

If a stud is not available in the exact spot you need, you must use specialized hardware. Hollow-wall anchors or toggle bolts can work, but a safer method is to mount a wider wooden backer plate to the wall first, securing it to adjacent studs, and then mounting the tablet bracket to that plate. This distributes the weight and prevents the thin luan wall from cracking or warping over time.

Managing Charging Cables and Power in Bunks

Power management is a crucial but often overlooked aspect of setting up a bunk entertainment system. Bunk beds rarely have convenient power outlets nearby, which can lead to dangerously long cords draped across sleeping spaces. To avoid accidental snagging or strangulation hazards, route charging cables cleanly along the corners of the bunk using self-adhesive cable clips.

If your camper’s 12V or 120V outlets are too far away, consider installing a dedicated dual-USB outlet near the head of the bunk. Alternatively, mounting a high-capacity portable power bank right next to the tablet mount using heavy-duty hook-and-loop tape provides a clean, off-grid power source without the need to run complex wiring through your camper walls.

Upgrading your camper bunk bed with a reliable tablet mount transforms a cramped sleeping nook into a highly functional personal theater. By selecting a mount that matches your RV’s wall structure and your travel style, you preserve precious living space while protecting your electronics. Choose your mount, secure the installation, and enjoy comfortable, hands-free viewing on your next road trip.