6 Best Wheel Chock Holders For Interior Storage For Vans

Nothing ruins a perfectly level campsite faster than hearing your wheel chocks rattle against the rear door during transit or tripping over them in the middle of the night. Proper storage is the unsung hero of van life, turning bulky, dirty safety gear into a non-issue that stays tucked away until the moment you reach your next destination. Choosing the right mounting system prevents unnecessary damage to your interior panels and ensures you aren’t wasting precious square footage on loose equipment.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

BAL Chock Holder: A Simple Sturdy Solution

The BAL Chock Holder is a textbook example of minimalist engineering designed for those who appreciate rugged simplicity. It features a straightforward bracket system that keeps standard plastic or rubber chocks locked against a wall, preventing them from sliding or shifting during transit. Because of its low profile, it works exceptionally well in tight cargo areas where every inch of floor space is prioritized.

This mount is the ideal choice for van dwellers who prefer a “set it and forget it” approach to organization. If you already use standard, wedge-style chocks, this bracket provides a permanent home that keeps them elevated and out of the way of your floor-level gear. It isn’t flashy, but it is reliable, making it a solid pick for those who value durability over aesthetic bells and whistles.

Camco Chock Mount: The Go-To Budget Pick

When the goal is to keep gear secure without breaking the bank, the Camco Chock Mount serves as the industry standard. It is lightweight, affordable, and compatible with the most common wedge-style chocks found in almost every hardware or auto parts store. Its primary strength lies in its universal design, which allows it to adapt to various chock sizes without requiring modifications.

For the budget-conscious builder, this is the most practical entry point for organizing wheel chocks. While it lacks the heavy-duty reinforced construction of premium alternatives, it performs its core duty perfectly within the controlled environment of a van interior. If you are looking for a functional, cost-effective solution that gets the job done without overcomplicating your build, this is the mount to choose.

Fastway ONEstep Holder: For X-Chock Users

The Fastway ONEstep holder is specifically engineered for those who have upgraded their setup to use scissor-style, expanding wheel stabilizers. These tools are significantly more awkward to store than traditional wedge chocks because of their mechanical joints and wider profiles. This holder secures the stabilizer in a collapsed position, preventing it from vibrating and wearing down the contact points.

This product is non-negotiable for anyone currently relying on expanding chocks for extra stability. Attempting to throw an X-Chock into a storage bin often results in tangled gear and damaged van interior walls. If you are invested in high-end stabilization equipment, treat this holder as a necessary protective measure for your gear and your van’s finish.

Quick Fist Clamps: A Versatile DIY Mount

QUICK FIST 4 CLAMP BOX

Quick Fist clamps are a staple in the off-road and van conversion community because they don’t care what shape your chocks are. Unlike dedicated brackets that require specific dimensions, these rubber clamps can stretch to fit almost any object you press into them. They provide a high-friction hold that absorbs vibration, effectively silencing the rattling noise that plastic chocks make against metal or wood walls.

These are best for builders who use non-standard, custom-made, or irregular-shaped chocks that won’t fit into a pre-molded plastic bracket. Because they are modular, you can mount two or three clamps at different intervals to accommodate the exact size of your equipment. Choose these if you appreciate the freedom to reconfigure your storage layout as your van’s needs evolve over time.

Valterra A10-0908: For Heavy-Duty Chocks

For those running heavy rubber wheel chocks—the kind that feel like solid lead and provide superior grip—the Valterra A10-0908 is the right tool for the job. These chocks are often too heavy for thin plastic clips and will simply snap them over time. The Valterra system is designed with a more robust mounting geometry that handles the weight and density of industrial-grade rubber effectively.

This is the product of choice for owners of heavier camper vans or those who travel frequently in mountainous terrain where heavy-duty gear is a requirement. It prioritizes strength over weight-savings, ensuring that your heavier, high-traction chocks aren’t sliding off a flimsy shelf during a sharp turn. If you prioritize safety gear that won’t fail under pressure, this is a clear winner.

Andersen Tuff Chock & Holder: Best Combo Kit

If you haven’t bought chocks yet, don’t buy the holder separately; the Andersen Tuff Chock and Holder combo is the most efficient use of space available. The holder is precision-molded to the exact contour of the chock, creating a nested fit that is virtually immune to vibration. This eliminates the “rattle factor” entirely, as the two pieces lock together with almost zero play.

This kit is perfect for the meticulous builder who wants every piece of equipment to look like a factory installation. It is more expensive than buying generic parts, but the trade-off is a silent, rattle-free experience that lasts for years. When you want a professional finish and a perfect fit, stop researching alternatives and pick this combo.

Where to Mount Your Chock Holder in a Van

Efficiency starts with location, and the most common mistake is placing chocks in the main living aisle where they become a tripping hazard. Ideally, mount your chocks in the rear “garage” area of the van, near the back doors, where you will be working to set them anyway. This keeps the dirt and mud from your tires outside your living space while allowing for quick access upon arrival.

Consider mounting them on a sidewall of the cargo area or directly onto the back doors themselves if the weight allowance permits. Door mounting is exceptionally convenient because the chocks are immediately available the moment the doors swing open. Just ensure you aren’t interfering with door latches or window mechanisms before drilling.

Installing Holders on Different Van Surfaces

Installing hardware in a van requires a bit more nuance than screwing things into a residential wall. If you are attaching holders to the van’s steel body, always use nutserts or rivet nuts rather than sheet metal screws, which will inevitably rattle loose. Use a dab of silicone or Loctite on the hardware to ensure that road vibrations don’t back the fasteners out over time.

If your walls are finished with wood paneling, reinforce the area behind the bracket with a secondary block of plywood. This spreads the load and prevents the bracket from ripping out of the paneling when you pull the chocks off the wall. Always double-check what is behind the wall—wiring, insulation, or fuel lines—before driving a screw into any surface.

DIY Storage: Bungees Bags and Brackets

For those who aren’t ready to drill holes, a heavy-duty mesh bag or a specialized bungee net can work as a stop-gap solution. Mount a few heavy-duty anchor points to the wall and use a bungee cord to pull the chocks tight against a flat surface. While this doesn’t offer the mechanical “click” of a dedicated holder, it prevents gear from sliding during transit.

This approach is highly flexible and essentially free if you have leftover gear from other projects. The trade-off is a slightly less organized look and the need to manually tension the cords every time. Use this method if your storage needs change frequently or if you are hesitant to commit to a permanent mounting position.

Keeping Your Chocks Clean and Rattle-Free

Wheel chocks spend their lives in dirt, mud, and gravel, and bringing that debris into your van is a recipe for a messy interior. Before mounting them to your wall, take a moment to rinse them off or keep them inside a lightweight waterproof sleeve. This simple habit keeps your interior panels free of grit and prevents the “crunchy” sound of sand rubbing against your wall brackets.

To address the noise, apply a small strip of adhesive-backed felt or rubber weather stripping to the contact points where the chock meets the bracket. This acts as a dampener, silencing any minor movements that occur when hitting bumps on the highway. A clean, silent setup is the hallmark of an experienced builder who understands that small details determine the quality of life on the road.

Choosing the right chock storage is rarely about the product itself and almost always about how well it fits into your specific workflow. Whether you prioritize a budget-friendly DIY setup or a precision-engineered combo, the best solution is the one that keeps your gear accessible, secure, and quiet.