6 Best RV Wood Cleaners For Furniture Restoration That Nomads Swear By

You glance at your RV cabinets, and the morning sun highlights every little scratch and patch of sun-faded finish from that last trip through the desert. Your rolling home is built for adventure, but that adventure takes a toll on its wooden surfaces. Choosing the right cleaner isn’t just about aesthetics; it’s about protecting your investment and making your small space feel like a well-cared-for sanctuary.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why RV Wood Care Needs Special Attention

The wood inside your RV lives a harder life than the furniture in a stationary house. It endures constant vibration on the road, which can stress joints and finishes over time. More importantly, it experiences dramatic swings in temperature and humidity, going from a cold, damp morning to a hot, dry afternoon in a single day. This constant expansion and contraction is brutal on wood and its protective coatings.

Most RV cabinetry isn’t solid oak or cherry, either. To save weight, manufacturers use thin wood veneers over substrates like particleboard or plywood. This construction is smart for a vehicle, but it means you have to be careful. A cleaner that’s too wet can seep into the seams, causing the particleboard to swell and the veneer to peel. A product that’s too harsh can strip the thin finish right off, leaving you with an even bigger problem.

This is why grabbing any old household cleaner from the grocery store is a gamble. You need products designed to handle these specific challenges. Some are for gentle cleaning, others for deep conditioning, and a few for serious restoration. Knowing the difference is key to keeping your rig’s interior looking great for years, not just for a season.

Howard Restor-A-Finish: For Quick Fixes

When you need to make cosmetic issues disappear without committing to a full-blown sanding project, Howard Restor-A-Finish is the product nomads reach for. This isn’t a cleaner in the traditional sense. It’s a unique formula that penetrates the existing finish to blend out minor scratches, scuffs, water rings, and sun fading. It revives the wood’s color and luster in minutes.

The application is simple: wipe it on with a fine steel wool pad (0000 grade) or a cloth, let it sit for a moment, and wipe it off. It comes in a variety of wood tones, so matching your cabinetry is straightforward. The key is to match the color as closely as possible. It won’t fix deep gouges or peeling varnish, but for the everyday wear and tear of life on the road, it works like magic.

Think of it as a powerful cosmetic touch-up. That scuff mark from your hiking boot near the entry door? Gone. The faded spot on the cabinet above the sink that gets direct sunlight every afternoon? Restored. It’s a brilliant solution for a quick refresh before a rally or if you’re preparing to sell your rig. It buys you time before a more intensive restoration is needed.

Murphy Oil Soap: Gentle, Everyday Cleaning

Murphy Oil Soap is the old-school, reliable workhorse for routine wood maintenance. It’s a vegetable oil-based soap that gently lifts dirt, grime, and dust without stripping the wood’s finish. For the kind of light, consistent cleaning needed in a space that’s constantly exposed to the outdoors, it’s nearly perfect.

The most important rule with Murphy’s is proper dilution and application. A little goes a long way. You want a damp cloth, not a soaking wet one. Wringing out your rag thoroughly is crucial, especially on those veneered surfaces where excess moisture is the enemy. Wipe the surface down, then follow up with a clean, dry cloth to remove any residue.

Use this for your weekly or bi-weekly wipe-down of cabinets, tables, and wood paneling. It effectively removes the film of dust and cooking grease that accumulates in a small living space. But remember its role: Murphy’s is a cleaner, not a polisher or a restorer. It sets the stage for other products by giving you a clean surface to work with.

Scott’s Liquid Gold: Deep Conditioning Care

If your RV’s wood looks dry, dull, and thirsty, Scott’s Liquid Gold is the answer. This is a deep conditioner, designed to penetrate and moisturize wood, which is especially critical if you spend time in arid, sun-drenched climates like the American Southwest. It helps prevent the wood from drying out and cracking over time.

Unlike a simple cleaner, Liquid Gold is an oil-based product that both cleans and conditions. You apply it with a soft cloth, and it works to replace the natural oils that have been lost due to sun and dry air. The result is a rich, healthy glow that looks less like a surface shine and more like the wood is nourished from within.

However, there’s a tradeoff. Because it’s oil-based, over-application can leave a slightly greasy film that attracts dust. It’s not something you’d use for daily cleaning. Think of it as a periodic treatment—maybe once a month or once a season—to revitalize wood that’s starting to look tired. It’s the deep-conditioning hair mask for your RV’s interior.

Old English Lemon Oil: Protect and Polish

After your wood is clean, Old English Lemon Oil provides the finishing touch. This product is all about polish and protection. It creates a beautiful, low-gloss sheen that makes wood surfaces look clean and well-maintained, and the fresh lemon scent is a welcome bonus in a compact RV.

Its primary function is to create a thin, protective barrier on top of the wood’s existing finish. This barrier helps repel dust and protects against minor moisture spills, giving you a moment to wipe them up before they can cause damage. It conditions the wood slightly, but its main job is to enhance the appearance and add a layer of defense.

A common mistake is using Old English as a cleaner. Applying it to a dirty surface will just trap the grime underneath a layer of oil, creating a sticky, dull mess over time. Always clean first with a product like Murphy Oil Soap, let it dry completely, and then apply the lemon oil as the final, beautifying step.

Formby’s Refinisher: For Deeper Restoration

When you’re past the point of quick fixes and polishes, Formby’s Refinisher is the tool for a serious overhaul. This is not a cleaner; it’s a solvent-based product designed to dissolve old, damaged finishes like varnish, lacquer, and shellac without sanding. This is a massive advantage in an RV, where containing dust from sanding is a nightmare.

The process involves applying the refinisher with a steel wool pad, which liquefies the old finish. You then wipe away the melted gunk, taking the scratches, watermarks, and alligatoring with it. It leaves the original wood and stain intact, ready for a new protective topcoat. This is a powerful tool, but it requires care. You absolutely must have maximum ventilation—windows open, fans running, and ideally, work outside if you can remove the piece.

Formby’s is for the tough jobs. Maybe you found a great second-hand table with a peeling top, or the original cabinets from your vintage rig are too far gone for oils and polishes. It’s a project, not a 10-minute task. But for bringing a piece of wood back from the brink, it’s an indispensable product that can save you from having to completely replace your cabinetry.

Guardsman Clean & Polish: For Modern Finishes

Many newer RVs don’t use traditional, oil-based finishes on their woodwork. Instead, they feature modern catalyzed lacquers, pre-finished panels, or even high-quality wood-grain laminates. Using an oil-based product like Scott’s or Old English on these surfaces is ineffective and just creates a greasy smear. For these modern materials, you need a modern product like Guardsman.

Guardsman Clean & Polish is typically water-based and silicone-free. It’s designed to clean fingerprints, smudges, and dust from sealed, modern finishes without leaving behind an oily residue. It enhances the natural sheen of the finish rather than trying to add an artificial one. The silicone-free part is crucial; silicone can contaminate the surface, making future repairs or refinishing nearly impossible.

Before you start any wood care project, you need to identify what kind of surface you have. If water beads up instantly and the finish looks almost like plastic, you likely have a modern, sealed finish. In that case, skip the traditional oils and reach for a product like Guardsman to keep it looking factory-fresh. Using the right product for the material is half the battle.

Applying Wood Cleaners in a Moving Vehicle

Working on your RV’s interior presents unique challenges, and safety is at the top of the list. Ventilation is non-negotiable, especially when using anything stronger than Murphy Oil Soap. Products like Formby’s Refinisher release powerful fumes that can be dangerous in a confined space. Open every window and roof vent, and run your fans to create cross-breezes. If you’re sensitive, wear a respirator.

Timing is also critical. Don’t start a refinishing project the morning you plan to hit the road. Products need time to cure, and that process is affected by the ambient temperature and humidity inside your rig. Plan these projects for when you’ll be stationary for at least a couple of days to allow for proper drying without dust from the road settling into your fresh finish.

Finally, think about storage. A bottle of lemon oil or a can of refinisher tipping over and leaking during transit would be a catastrophe. Always ensure lids are screwed on tight and store chemicals upright in a secure, leak-proof bin in a storage bay. Never leave them loose in a cabinet where they can become projectiles during a sharp turn or sudden stop.

Ultimately, caring for the wood in your RV is about matching the right tool to the job at hand. Whether you need a quick touch-up, a gentle daily clean, or a full-scale restoration, there’s a product that fits the bill. By understanding what your surfaces are made of and what they need, you can keep your rolling home looking beautiful and feeling like a true sanctuary on any road you travel.