6 Best RV TV Mounts With Integrated Cord Management That Declutter Your Life

That tangled nest of wires behind your RV television isn’t just an eyesore; it’s a constant, low-grade source of stress in a space where every inch matters. You go to swivel the screen, and a cable snags. You hit a bump on the road, and you can only hope the whole setup holds together. A good TV mount does more than just hold a screen to a wall—it brings order to the chaos.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why Cord Management Matters in a Small RV Space

In a sticks-and-bricks house, you can often hide cable clutter behind a large entertainment center. In an RV, there’s nowhere to hide. Every stray wire contributes to a feeling of disorganization, making your small living area feel even smaller and more chaotic. This isn’t just about aesthetics; it’s about reclaiming mental and physical space.

Functionality is the other key piece of the puzzle. When your HDMI, power, and antenna cables are managed properly, you can articulate your TV mount without worrying about unplugging something by accident or putting stress on the ports. Need to plug in a gaming console for a rainy day? A clean setup means you can find the right port in seconds instead of digging through a dusty, tangled mess.

Finally, think about safety and maintenance. Loose cables can get snagged on cabinet doors, caught by passing pets or kids, or even become a tripping hazard if they dangle too low. A mount with integrated cord management secures those lines, reducing wear and tear and making it far easier to troubleshoot a connection issue when one inevitably arises. It’s a small detail that has a massive impact on your day-to-day life on the road.

MORryde TV56-011H: Secure Locking for Travel

The first thing you notice about any MORryde mount is its robust, no-nonsense build, and the TV56-011H is a prime example. Its standout feature is a simple but incredibly effective locking pin system. Before you hit the road, you push the mount flat against the wall and slide a metal pin into place, completely immobilizing the arm. This isn’t a flimsy plastic latch; it’s a positive lock that eliminates any chance of the TV swinging out on a rough patch of road.

For cord management, this mount uses a straightforward approach: integrated Velcro straps. While not as sleek as in-arm channels, these straps are highly practical. They allow you to bundle cables of various thicknesses securely along the articulating arm, keeping them neat and preventing them from getting pinched in the joints as you move the screen.

This mount is for the RVer who prioritizes travel-day security above all else. If you frequently travel on bumpy forest service roads or just want absolute peace of mind that your television will stay put, the MORryde locking system is a game-changer. The simple cord management is just a practical bonus that gets the job done without overcomplicating things.

Mount-It! MI-421: Full Motion & Locking Latch

The Mount-It! MI-421 strikes a fantastic balance between full-motion flexibility and road-ready security. Like the MORryde, it features a locking mechanism, but this one is an easy-to-use pull-string latch. When you’re ready to travel, you just push the TV back to the wall until it clicks into place. To release it, a quick tug on the cord unlocks the arm, making it perfect for quick and frequent adjustments.

Where this mount shines for organization is its use of removable plastic cable clips. These clips snap directly onto the arm, creating a clean channel for your wires. This system keeps cables tidy and aligned with the arm’s movement, preventing snags or unsightly dangling loops. It’s a clean look that’s also easy to modify if you need to add or remove a cable.

This is the ideal mount for someone who wants the best of both worlds: a secure lock for travel and smooth, full-motion articulation at the campsite. If you often find yourself angling the TV from the dinette to the sofa, the MI-421’s combination of a long extension arm, easy-to-use latch, and clean cable clips makes it an incredibly versatile and user-friendly option.

Perlesmith PSMFK1: Long Arm & Easy Cable Clips

Sometimes, you need to pull your TV far away from the wall to get the perfect viewing angle, especially in layouts where the seating area is offset from the mounting location. The Perlesmith PSMFK1 is built for exactly this scenario, boasting an impressively long extension arm that can reach out and swivel dramatically. This flexibility can transform a single TV into the entertainment hub for your entire living space.

To manage the wires along that long arm, Perlesmith includes simple, open-style cable clips. You don’t have to thread your cables through a tight channel; you just press them into the clips that attach to the arm. This makes setup and changes incredibly simple. The system ensures that as you extend and retract the arm, your cables move with it smoothly, preventing them from catching or pulling taut.

While it lacks the robust locking pin of a dedicated RV mount, many users successfully secure it for travel with a simple ball bungee or Velcro strap. This mount is a great choice for the RVer who values maximum viewing flexibility and easy installation over a built-in locking mechanism. It’s a classic design that delivers on its primary promise: putting your screen exactly where you want it.

PAW International: For Indoor & Outdoor Viewing

The PAW International system isn’t a traditional articulating mount; it’s a brilliantly simple solution for a common RV desire: watching TV outside. The system works with two main components: a VESA adapter plate that attaches to your TV and a wall mounting plate. You install a wall plate inside your RV and another one on an exterior wall, allowing you to lift the entire TV off one mount and hang it on the other in seconds.

Cord management with this system is a matter of process. You’ll want to create a dedicated "bundle" of cables (power, HDMI, etc.) with enough slack to be easily unplugged from your interior connections. Many RVers use a small power strip and a short HDMI cable that stays with the TV, so you only have to unplug one or two things to move the entire unit outside. The beauty is in its simplicity—no complex arms, just a secure, non-moving bracket.

This system is perfect for the RVer who loves to entertain outdoors. If your priority is moving one TV between two locations rather than articulating it in a single spot, PAW is the answer. It declutters by design, eliminating the need for a second TV and the associated wiring, offering a minimalist and highly functional approach to RV entertainment.

ECHOGEAR EGLF2: In-Arm Concealed Cable Routing

For those who want the absolute cleanest look possible, the ECHOGEAR EGLF2 delivers. This mount is a premium, full-motion articulating mount that takes cord management to the next level. Instead of external clips or straps, it features channels built directly into the mount arms. You can route your cables inside the arms themselves, hiding them completely from view.

Plastic covers snap into place over the channels, creating a seamless, professional-looking installation that looks like it came from the factory. This in-arm routing keeps wires protected and entirely out of the way, providing the ultimate decluttering solution. The mount’s fluid motion and solid construction mean you get both top-tier aesthetics and high performance.

This is the mount for the RVer who is building a high-end rig or renovating an older one with a focus on clean, modern design. While it doesn’t have a travel lock (requiring a strap for travel days), its unparalleled cable concealment is a huge win for anyone who can’t stand the sight of a single stray wire. It’s about making your technology blend seamlessly into your living space.

VideoSecu ML531BE: A Reliable Articulating Mount

The VideoSecu ML531BE is a long-standing favorite in the RV community for a reason: it’s a tough, reliable, and affordable workhorse. This articulating mount offers a good range of motion, including tilt, swivel, and extension, making it a versatile choice for most standard RV layouts. It’s a proven design that simply gets the job done without unnecessary frills.

For cord management, it uses a basic but effective system of integrated cable hooks. These small hooks are part of the arm’s metal structure, allowing you to loop your cables through them to keep the wires following the arm’s movement. It’s a simple, durable solution that prevents pinching and keeps everything reasonably tidy.

This mount is the go-to for a budget-conscious RVer who needs a dependable full-motion mount and isn’t chasing a high-end aesthetic. It doesn’t have a built-in lock, so you’ll need to secure it with a strap for travel, but its durability and low price point make it a smart, practical choice. It proves that you don’t need to spend a fortune to solve the dual problems of TV placement and cable clutter.

Key Factors for Selecting Your RV TV Mount

Choosing the right mount goes beyond just picking one from a list. Your specific RV layout, travel style, and personal preferences will determine the best fit. Keep these four key factors in mind as you make your decision.

First, evaluate the locking mechanism. If you travel frequently or on less-than-perfect roads, a mount with a built-in, positive locking pin or latch is a non-negotiable safety feature. For stationary or short-haul RVers, securing the arm with a simple strap might be perfectly adequate.

Second, consider the range of motion. Do you just need to tilt the screen down slightly, or do you need to swing it 90 degrees to be seen from the kitchen? A mount with a long extension and wide swivel angle offers more flexibility but also has a larger footprint on your wall. Be realistic about how you’ll actually use it.

Third, get the technical details right.

• VESA Pattern: Check the pattern of the four screw holes on the back of your TV (e.g., 100x100mm or 200x200mm) and ensure the mount is compatible.
• Weight Capacity: Your mount’s weight rating must exceed the weight of your television. Don’t cut this close.
• Wall Structure: You must anchor the mount securely into a structural element of your RV wall, like a stud or a reinforced backer plate. Use a stud finder and don’t rely on the thin wall paneling alone.

Finally, decide what style of cord management works for you. Do you want the pristine, hidden look of in-arm channels, or are you happy with the practical simplicity of Velcro straps or plastic clips? Each style works, but the choice comes down to your budget and how much a perfectly clean look matters to you.

Ultimately, the best RV TV mount isn’t the one with the most features, but the one that solves your specific daily frustrations. By choosing a mount that not only holds your screen securely but also tames your cables, you’re doing more than just organizing—you’re making your small space feel more open, calm, and functional every single day.