6 Best RV Sewer Hose Carriers For Tight Storage That Maximize Every Inch

There’s no moment quite like packing up your RV and realizing the only place left for the "stinky slinky" is a pristine storage bay next to your camp chairs. We’ve all been there, trying to coil a dripping, dirty sewer hose into a plastic bin that’s just a little too small. A proper RV sewer hose carrier isn’t just an accessory; it’s a sanity-saver that reclaims precious space and keeps the messy parts of RVing safely contained.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why a Dedicated RV Sewer Hose Carrier Matters

Storing your sewer hose is one of the least glamorous, but most critical, parts of RV life. The factory-installed 4-inch square bumper on many trailers is a notoriously bad solution. Hoses get snagged, the metal rusts from the inside out from trapped moisture, and the end caps vibrate off on the highway, sending your expensive hose skittering across the pavement.

A dedicated carrier solves three problems at once. First, it provides a secure, sealed tube that contains any residual drips and odors, keeping them outside your living space and storage compartments. Second, it protects your hose from UV rays and road debris, dramatically extending its life. A sun-baked, brittle hose is a leak waiting to happen at the worst possible time.

Finally, and most importantly for tight storage, it frees up an entire storage bay for clean gear. That space you were using for a clunky, awkward hose bin can now hold leveling blocks, outdoor rugs, or an extra cooler. It’s a simple upgrade that transforms a daily frustration into a non-issue, making setup and teardown faster, cleaner, and more efficient.

Valterra A04-5094BK: The Adjustable Classic

If you’ve looked for an aftermarket hose carrier, you’ve seen the Valterra. This is the go-to, tried-and-true solution for countless RVers for a reason. Its genius lies in its simplicity and adjustability. The tube telescopes from 50 inches all the way to 94 inches, allowing you to create a custom-fit storage solution for the exact length of your hose and the specific mounting space on your rig’s frame.

Made from durable black polymer, it’s built to withstand the elements. The end caps are a key feature; they’re vented to allow air to circulate, which helps moisture evaporate and prevents your hose from getting moldy and foul-smelling inside the tube. The doors lock with a simple, sturdy quarter-turn latch, and you can add a small padlock for extra security if you’re concerned about theft. For most RVers needing a straightforward, reliable, and affordable upgrade, the Valterra is the first and often best choice.

Lippert Waste Master: A Complete System Solution

The Lippert Waste Master isn’t just a carrier; it’s a fully integrated hose management system. Think of it less as a tube you put a hose in and more as a permanently mounted boom that the hose lives inside. The hose itself remains connected to your RV’s plumbing, extending out of the carrier when you need it and retracting back inside when you’re done. This is the ultimate "clean hands" solution.

The convenience is unmatched. You never have to handle a dirty hose, coil it up, or wrestle with separate fittings. The business end features a permanently attached nozzle with a shut-off valve and a clear section, so you can see when the tank is flowing and when it’s finished. It completely eliminates the messiest part of the dump station process.

Of course, this level of convenience comes with tradeoffs. The Waste Master is a significant investment compared to a simple tube carrier, and the installation is more involved. You’re also locked into their proprietary hose and nozzle system, so you can’t just swap in a standard RhinoFLEX if yours gets damaged. It’s a premium upgrade for those who prioritize cleanliness and convenience above all else and are willing to invest in a system rather than just a part.

RecPro Super-Slider for Extra-Long Hose Storage

Sometimes, a standard 15-foot hose just won’t cut it. If you frequent state parks or older campgrounds with distant sewer connections, you might carry 30 or even 40 feet of hose. That’s where a carrier like the RecPro Super-Slider becomes essential. These carriers are built for one thing: maximum capacity.

Often extending to over 100 inches, the Super-Slider provides enough length to store two connected hoses without a struggle. More importantly, they typically feature a larger 5-inch diameter. This extra inch of space is a game-changer, as it easily accommodates not just the hose but also the bulky bayonet fittings, 90-degree elbows, and donut seals. You can store your entire sewer setup, fully assembled, in one place. The hinged, hatch-style door is another practical touch, making it far easier to access than a screw-on cap, especially on a cold morning.

DW Inc. Super-Tube: A Simple, Rugged Option

The DW Inc. Super-Tube is the definition of heavy-duty simplicity. Unlike adjustable carriers, it comes in fixed lengths, so you need to measure your space carefully before buying. What you lose in adjustability, you gain in sheer toughness. This is a thick-walled, single-piece tube designed to take a beating.

Its main selling point is its generous size. The "mega" version has an oversized diameter that swallows even the bulkiest hose fittings with room to spare. No more fighting to get that last connector inside the tube. The door design is also excellent—a simple, hinged cap secured with a pin and clip. It’s foolproof, can’t be overtightened, and won’t vibrate loose on a rough road. If you want a no-nonsense, overbuilt carrier that you can install and forget about, the Super-Tube is a fantastic choice.

Mount-n-Lock Carrier for Bumper-Mounted Storage

The problem with adding a carrier is often not the carrier itself, but where to put it. Many travel trailers and fifth wheels have precious little free space on the frame. The Mount-n-Lock system brilliantly solves this by creating a rock-solid way to mount storage tubes directly to your RV’s 4-inch square bumper without drilling a single hole.

The system uses heavy-duty, U-shaped brackets that clamp around the bumper, providing a secure platform for attaching a carrier. This distributes the load and avoids compromising the thin steel of a factory bumper, which was never designed to have holes drilled in it. While Mount-n-Lock sells their own carriers, the real value is in the brackets, which can often be adapted to hold other brands of carriers or even the DIY fence post solution. For anyone with a bumper and nowhere else to mount a tube, this is the answer.

The 5" Vinyl Fence Post DIY Carrier Solution

For those who are handy and on a budget, the DIY vinyl fence post carrier is a legendary RV mod. All you need is a 5" x 5" square vinyl fence post sleeve, two matching end caps, and some basic hardware. You can cut the post to the exact custom length you need, maximizing every available inch of space under your rig.

The benefits are huge. It’s incredibly inexpensive, and the square shape is often more space-efficient for mounting than a round tube. The 5-inch dimension provides ample room for hoses and all their bulky fittings. To make it truly next-level, you can insert a length of vinyl rain gutter inside the post. This acts as a slide-out tray, allowing you to pull your entire hose out smoothly without reaching deep into the tube.

The tradeoff is the effort. You have to source the parts, figure out your own mounting brackets, and devise a latching system for the end cap (a simple pin or bolt works great). You’ll also need to drill a few small holes in the bottom for drainage. But for an hour or two of work, you get a perfectly customized, high-capacity carrier for a fraction of the cost of a commercial product.

Choosing Your Carrier: Mounts, Size, and Latches

Picking the right carrier comes down to three key factors: where you can mount it, the size you need, and the small features that make it easy to use. Before you buy anything, get under your RV with a tape measure. Your mounting options will determine your best choice. Look for open space along the I-beams of the frame, behind the axles, or on the bumper. This will tell you the maximum length and diameter you can fit.

Next, focus on size. Don’t just measure your hose; measure it compressed for storage with the end fittings attached. Those fittings add several inches and significant bulk. This is why a 5-inch diameter tube is almost always a better choice than a 4-inch one. The frustration of trying to jam a hose into a tube that’s just a little too small is something you only want to experience once.

Finally, consider the latches and doors. A screw-on cap can be difficult to turn with wet or cold hands. A hinged door with a simple pin or a positive-locking latch is often far more user-friendly in real-world conditions. Also, ensure the carrier has vents. A sealed tube will trap moisture and turn your hose into a smelly, moldy mess. It’s these small, practical details that separate a great carrier from a merely adequate one.

Ultimately, the best RV sewer hose carrier is the one that gets the messiest part of your gear out of your primary storage and into a dedicated, secure home. It’s a small project that delivers an outsized improvement in cleanliness, organization, and peace of mind. Every time you pull up to a dump station, you’ll be glad you made the upgrade.