6 Best RV Jack Pad Kits For Beginners Nomads Swear By

You’ve found the perfect spot, but the ground slopes and the dirt is soft from yesterday’s rain. Your RV is only as stable as the ground it’s on, and putting a metal jack foot directly onto soft earth is a recipe for trouble. This is the moment every new RVer realizes that a solid foundation isn’t a luxury—it’s a necessity.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why RV Jack Pads Are a Non-Negotiable Item

Let’s get one thing straight: the little metal feet on your RV’s stabilizer or leveling jacks are not enough. They concentrate your rig’s entire weight into a few tiny points. On soft ground like grass, sand, or even hot asphalt, those feet will sink, guaranteed.

When a jack sinks, your RV becomes unstable and unlevel. Worse, it puts immense stress on the jack mechanism and the RV frame itself. I’ve seen jacks bent and frames twisted from this simple, preventable mistake. Jack pads distribute that weight over a much larger surface area, preventing sinking and protecting both your rig and the ground you’re parked on.

Beyond preventing sinking, pads provide a stable, flat surface on uneven terrain like gravel or lumpy dirt. They protect the jack feet from getting caked in mud or scratched on rocks. Think of them as the work boots for your RV’s legs—they provide grip, protection, and a solid foundation for everything else.

Camco FasTen Blocks: The Versatile Starter Kit

If you walk through any campground, you’ll see stacks of these bright orange or yellow blocks. There’s a reason for that. Camco’s leveling blocks are the default starting point for most RVers because they are cheap, lightweight, and incredibly versatile.

Their simple, interlocking design lets you stack them like LEGOs to get the height you need. You can use them under your stabilizer jacks, your tongue jack, or even build a ramp to drive a tire onto for leveling. A ten-pack is easy to store and gives you enough flexibility to handle most common campsite situations.

The tradeoff for their low cost and light weight is durability. They can crack under the immense pressure of a heavy rig, especially if placed on a sharp rock. They can also be a bit slippery on some surfaces. But for a beginner finding their footing, you can’t beat the price and utility. They are the perfect tool for learning what you need before investing in a more specialized system.

Andersen Levelers: Easiest for Towable RVs

For anyone with a travel trailer or fifth wheel, leveling side-to-side can be a frustrating game of "guess and check" with blocks. You pull forward, stack some blocks, back up, and hope you got it right. The Andersen Leveler system eliminates that completely. It’s a simple, brilliant concept: a curved ramp you place under the low-side tire.

You just drive onto the ramp until your level tells you you’re good, then you chock it with the included wedge. That’s it. No stacking, no guessing, no moving the rig back and forth five times. It offers continuous, precise leveling up to four inches, which is more than enough for most campsites.

The main consideration is that this is a wheel leveling solution, not a jack pad. You’ll still need separate pads or blocks for your stabilizer and tongue jacks. They are also bulkier to store than a stack of blocks. But for pure, frustration-free side-to-side leveling on a towable RV, nothing beats the simplicity and speed of the Andersen system.

Tri-Lynx Levelers: A Durable Interlocking System

Think of Tri-Lynx Levelers as the heavy-duty evolution of the basic Camco blocks. While they serve the same function, their robust, honeycomb design provides a significantly higher weight rating and much better durability. They feel more substantial in your hand and inspire more confidence under a heavy load.

Their key advantage is how securely they interlock. You can confidently build a tall, stable tower that won’t shift or slip. This makes them a favorite among owners of larger travel trailers and fifth wheels who need more height and stability than entry-level blocks can provide. They also come with a handy storage bag, which is a nice touch.

Of course, this added durability comes at a higher price point. But if you’ve ever cracked a cheaper block or felt uneasy about a tall stack, the upgrade is well worth it. They offer the same versatility as basic blocks but with a build quality that’s meant to last the life of your RV.

SnapPad EQ: The Best Permanent Jack Pad Solution

For many full-timers and convenience-focused RVers, SnapPads are a game-changer. These are not blocks you place down; they are heavy-duty, permanent rubber pads that snap directly onto the bottom of your rig’s existing leveling jack feet. Once they’re on, they’re on for good.

The beauty is in the "set it and forget it" design. You never have to crawl under your rig to place pads again. They permanently increase the jack’s footprint, providing excellent stability and preventing sinking on soft ground. They also dampen vibrations and protect your metal jack feet from gravel and asphalt.

The crucial detail is that SnapPads are system-specific. You must order the exact model that fits your rig’s leveling system (LCI, HWH, etc.) and foot size. They also add a bit of weight and slightly reduce your ground clearance, which is a consideration for some. But for the sheer convenience of never having to think about jack pads again, many nomads swear they are the best upgrade they’ve ever made.

RoadWarrior Pads: For Heavy Rigs & Soft Ground

When you’re piloting a big Class A motorhome or a massive toy hauler, standard blocks can feel terrifyingly small. This is where dedicated jack pads like those from RoadWarrior come in. These aren’t for gaining height; they are for one thing and one thing only: maximum weight distribution.

Made from incredibly tough, recycled materials, these pads provide a huge, solid footprint. Think of parking your 40,000-pound rig on a grassy field or a sun-baked asphalt pad in Arizona. A RoadWarrior pad spreads that immense pressure out, preventing your heavy-duty hydraulic jacks from sinking and damaging the surface. They often come with a rope handle, making them easy to place and retrieve.

Their size is both their greatest strength and their biggest weakness. They provide unparalleled stability but are large, flat, and can be awkward to store. You can’t stack them for leveling. But if you have a heavy rig and never want to worry about soft ground again, having a set of these on board provides ultimate peace of mind.

BAL Light Trailer Leveler: For Single-Axle Rigs

Owners of small, single-axle trailers have a unique and elegant option: the BAL Light Trailer Leveler. This clever device completely sidesteps the need to drive onto blocks or ramps. Instead, it fits around the tire you need to lift.

You place the lifting pads around the low tire and then use an included ratchet wrench to raise that side of the trailer. It offers incredible precision, allowing you to get perfectly level without moving your rig an inch. It also chocks the wheel as it lifts, adding a layer of security.

This is a highly specialized tool. It only works on single-axle trailers and won’t work for dual axles, fifth wheels, or motorhomes. But for the pop-up, A-frame, or small travel trailer owner, it is arguably the most stable and precise leveling solution on the market. It eliminates all the guesswork and provides a rock-solid foundation.

Choosing Your Kit: Pads vs. Blocks vs. Ramps

With so many options, the right choice comes down to your rig, your budget, and your tolerance for setup chores. There is no single "best" answer, only the best fit for you. We can break it down into three main approaches.

Blocks (Camco, Tri-Lynx) are the jack-of-all-trades. They are the most versatile, capable of being used under jacks and tires. They are your best bet if you’re on a tight budget or have varied needs and limited storage space. Start with Camco, and upgrade to Tri-Lynx if you find you need more durability.

Ramps and Lifts (Andersen, BAL) are specialized problem-solvers. They are designed to make the specific task of side-to-side wheel leveling faster and easier. If your biggest headache is the back-and-forth dance of driving onto blocks, one of these will be a revelation. Just remember you’ll still need something for your stabilizer jacks.

Pads (SnapPad, RoadWarrior) are all about the foundation. They prioritize stability and convenience over height adjustment. SnapPads are for the RVer who wants to eliminate a setup step entirely, while RoadWarrior pads are for the heavy-rig owner who needs maximum support on questionable ground. Many experienced nomads end up with a hybrid system: permanent SnapPads for everyday use, with a few blocks tucked away for those rare, extremely unlevel sites.

Ultimately, your leveling and support system is the foundation of your home on wheels. Don’t treat it as an afterthought. Choosing the right kit isn’t just about convenience; it’s about protecting your investment and ensuring your comfort and safety wherever you decide to park.