7 Best Removable Pontoon Table Pedestals For Easy RV Packing To Maximize Space

That built-in dinette table feels like a great idea until you try to haul a bike inside or just want to stretch out on the floor with the dog. Suddenly, that permanent fixture becomes the biggest obstacle in your tiny living space. The solution isn’t getting rid of a table; it’s making the table work for you with a removable pedestal.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why Removable Pedestals Maximize RV Floor Space

A fixed table pedestal dictates exactly how you can use a huge chunk of your RV. It locks you into one layout: eat here, work here, and that’s about it. But a removable pedestal transforms that static area into a flexible, multi-use zone.

When the table is gone, the floor opens up completely. That dinette area can become a yoga spot in the morning, a playpen for the kids in the afternoon, or an open space for packing bulky gear. It’s not just about adding square footage; it’s about making the square footage you have work two or three times harder. This is the core principle of successful small-space living.

The psychological impact is just as important as the physical one. Removing the table makes a small rig feel significantly larger and less cluttered. It gives you breathing room. Instead of constantly navigating around a fixed obstacle, you get a clear path and a sense of openness that’s hard to come by in a vehicle.

Lagun Table Leg System: Ultimate Adjustability

The Lagun system is legendary in the van life and small RV community for a reason. It doesn’t mount to the floor at all. Instead, it mounts to the side of your dinette bench, a cabinet, or any other sturdy vertical surface. This leaves your floor completely clear, all the time.

Its real genius lies in its two articulation points. You can swing the table into virtually any position, raise or lower it, and then lock it down tight. Need a desk? Swing it over. Time for dinner? Position it between the benches. Need it gone? Swing it completely out of the way or lift the entire arm and table off the mounting plate in seconds. No tools required.

The main tradeoff is cost and installation. The Lagun is a premium product with a price to match, and you need a very solid vertical surface to mount it to—it won’t work on a flimsy interior wall. But for those with a small, convertible space who need maximum flexibility, the Lagun is often the best possible solution.

Springfield Taper-Lock: A Secure, Rattle-Free Fit

If you’ve ever driven an RV with a cheap, wobbly table, you know the sound. That constant, irritating rattle on travel days is enough to drive anyone crazy. The Springfield Taper-Lock system is designed specifically to eliminate this problem. It’s a simple, robust design that feels rock-solid.

The magic is in the tapered post and base. As you insert the post, it wedges itself tightly into the base, creating a friction-fit that leaves no room for movement or vibration. When it’s locked in, it feels like a permanent installation. To remove it, you just give it a firm twist and pull. It’s a brilliantly simple piece of engineering.

This system is a fantastic upgrade for anyone replacing a standard, non-tapered post. You get the benefit of a removable table without the annoying wobble of lesser designs. Its primary strength is stability, making it ideal for heavier tabletops or for people who use their dinette as a primary workstation and can’t stand any shaking.

ITC Sequoia II System: The Flush-Mount Champion

Tripping hazards are a real concern in a tight space. Many floor-mounted pedestals leave a raised "puck" on the floor when the table is removed, just waiting for a toe in the middle of the night. The ITC Sequoia II system solves this with an elegant, flush-mount floor base.

When the leg is removed, the base sits perfectly level with your flooring. You can walk over it, put a rug down, or slide a storage bin across it without a snag. The leg itself uses a secure twist-lock mechanism that is both strong and easy to operate. You simply drop the leg in, give it a turn, and it’s locked tight.

The installation requires cutting a precise hole in your floor, so it’s a bit more involved than a surface-mount base. However, for anyone who plans to have the table removed frequently, the safety and convenience of a truly flat floor is a massive advantage. It’s the cleanest look you can get from a floor-mounted system.

Garelick Side Mount Leg: For Wall-Based Support

Sometimes, a floor mount just isn’t an option. Maybe you have in-floor heating, a critical water tank below, or you simply want a completely unobstructed floor. The Garelick Side Mount Leg offers a clever alternative by using the wall for support.

This system consists of a C-shaped leg that plugs into two brackets mounted on a wall or the side of a cabinet. The tabletop rests on top, creating a stable surface without a single post touching the ground. When you’re done, you just lift the leg and table assembly out of the brackets and store it away.

The obvious limitation is that you need a structurally sound wall right where you want your table. It also offers less positional flexibility than a single-post or Lagun system. But for specific layouts, like a narrow galley or a two-person dinette against a wall, it’s a fantastic way to achieve an open floor plan.

Lippert Solid-Mount: A Robust RV OEM Favorite

If you look at the table pedestal in many factory-built RVs, you’ll likely find something like the Lippert Solid-Mount. It’s not flashy or innovative, but it is incredibly strong and reliable. This is the workhorse of the RV industry.

The system uses a simple, sturdy aluminum post that fits into a surface-mounted floor base. The connection is snug, and the components are built to withstand the rigors of constant travel. While it might not have the anti-rattle features of a Taper-Lock or the flush-mount design of a Sequoia, it does its one job exceptionally well: holding a table up securely.

This is often the most practical choice for a direct replacement of a broken or worn-out factory pedestal. The mounting hole pattern is often standard, making for an easy swap. If your priority is strength and proven reliability over advanced features, this is a safe and economical bet.

Seachoice Anodized Post: The Corrosion-Proof Pick

RV life often means exposure to the elements. Humidity, coastal air, and morning condensation can wreak havoc on cheap metal components, leading to rust, pitting, and a pedestal leg that gets stuck in its base. The Seachoice Anodized Post is built to fight this.

Anodizing is an electrochemical process that creates a thick, durable, and corrosion-resistant oxide layer on the surface of the aluminum. It’s the same technology used in marine applications for parts that are constantly exposed to saltwater. This means your pedestal will look good and function smoothly for years, even in challenging environments.

While any aluminum post is rust-resistant, an anodized one takes it to the next level. If you camp frequently near the ocean, in the humid Southeast, or store your RV outdoors in a damp climate, investing in an anodized pedestal is a smart move for long-term durability. It prevents the frustrating experience of a corroded leg that refuses to come out of its base.

AP Products Recessed Base: Disappears When Stowed

For the ultimate in clean floors, the AP Products Recessed Base takes the flush-mount concept one step further. Instead of just being flush with the floor, the entire base is recessed into the subfloor, with only a cap sitting level with your finished flooring.

When the table is stowed, you’re left with a small, flat cap that is completely unobtrusive. It’s the closest you can get to making the table mount completely disappear. The system uses a simple pressure-fit leg that is easy to install and remove, providing a stable platform for your tabletop.

This is not a simple surface-mount installation. It requires cutting into your RV’s subfloor, which can be intimidating for some owners. It’s an ideal choice during a full renovation or a new build where the floor is already being worked on. For those willing to do the extra work, the reward is a seamless and trip-free floor.

Ultimately, the best removable pedestal is the one that removes the biggest barrier in your specific RV. Whether you need the infinite adjustability of a Lagun or the simple security of a Taper-Lock, choosing the right system is a powerful step toward creating a space that is truly flexible, open, and ready for any adventure.