6 Best RV Ramp Storage Solutions For Leveling That Nomads Swear By
Keep your RV leveling ramps organized and secure. We explore 6 top storage solutions used by nomads for easy access and a quiet, rattle-free ride.
You’ve just spent twenty minutes backing into the perfect campsite, only to realize your leveling blocks are buried under camp chairs and a tangled water hose in the deepest corner of your storage bay. We’ve all been there, wrestling with gear when all we want to do is crack open a cold drink. This isn’t just an inconvenience; it’s a symptom of a storage system that isn’t working for you.
Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!
Why Proper Leveling Block Storage Matters
Leveling blocks live a hard life. They get covered in mud, sand, and pine sap, then get tossed into storage. Without a dedicated spot, that grime gets transferred to everything else in your basement bay—your clean hoses, your outdoor rug, your folding chairs.
A good storage solution isn’t just about cleanliness; it’s about efficiency and protecting your gear. When blocks are rattling around loose, they can chip, crack, or even damage the interior walls of your storage compartment. More importantly, having them accessible means setup and breakdown are faster and less stressful. A smart storage system turns a frustrating chore into a simple, two-minute task.
Think about arriving at a site after dark in the pouring rain. The last thing you want is a treasure hunt for your levelers. Having a consistent, easy-to-reach spot for them means you can get level and get inside, dry and warm, without a second thought. This is one of those small quality-of-life upgrades that has an outsized impact on your day-to-day life on the road.
Camco FasTen Block Bag: Simple & Effective
Keep your RV leveling blocks organized and protected with this durable polyester storage bag. It securely holds up to ten 8-inch x 8.5-inch blocks and features a sturdy zipper and convenient handle for easy transport and storage.
Sometimes the simplest solution is the best one. The ubiquitous zippered canvas bag, like the one Camco makes for its FasTen blocks, is the default for a reason. It’s an inexpensive, straightforward way to keep a standard set of 10 interlocking blocks contained.
The primary benefit is containment. The blocks stay together, preventing them from scattering across your storage bay during travel. The bag keeps the worst of the dirt and mud off your other gear. However, these bags aren’t perfect. The zippers can fail over time, and a set of truly muddy blocks will quickly turn the inside of the bag into a mess that’s difficult to clean. Still, for a budget-friendly starting point, it’s hard to beat.
Andersen Levelers Carry Bag for a Custom Fit
Level your camper or fifth wheel quickly and precisely with the Andersen Camper Leveler. This easy-to-use system levels at any increment from 1/2" to 4" and works on trailers up to 30,000 lbs with tires up to 32" diameter.
If you use the crescent-shaped Andersen "drive-on" levelers, you know they’re an awkward shape to store. They don’t stack neatly like traditional blocks. This is where their purpose-built carry bag becomes less of a convenience and more of a necessity. It’s designed to hold two levelers, two chock blocks, and two rubber mats perfectly.
The bag keeps the entire system in one place, which is its greatest strength. You grab one handle and have everything you need. It also prevents the levelers from rolling around and taking up more space than they should. The downside is obvious: it’s a single-purpose product. If you don’t own Andersen levelers, this bag is useless, but if you do, it’s a game-changer for organization.
This solution highlights a key principle of small-space living: custom-fit storage is almost always more efficient than generic storage. By matching the container to the object, you eliminate wasted space and make the item easier to handle. It’s a small investment that pays off every time you set up camp.
Valterra A-Frame Tray: Unused Space Saver
For travel trailer owners, the A-frame at the front of the rig is often a dead zone of wasted space. The Valterra A-Frame Storage Tray is a clever piece of hardware designed to reclaim it. This sturdy plastic tray bolts directly onto the A-frame, sitting just behind the propane tanks, creating a perfect, out-of-the-way shelf.
This is an ideal spot for leveling blocks. It gets them completely out of your primary storage bays, freeing up valuable real estate for other gear. Because the tray is open to the elements, you can toss muddy or wet blocks in without a second thought—they’ll air dry on their own. It’s an elegant solution that uses space you probably weren’t using anyway.
The tradeoffs are exposure and security. Anything stored here is visible and exposed to road grime and weather. While leveling blocks aren’t a high-theft item, you’ll still want to secure them with a bungee cord or cargo net to prevent them from bouncing out on a rough road. For many trailer owners, these minor compromises are well worth the benefit of reclaiming an entire storage bay.
Securely fasten items outdoors with this 20-piece heavy-duty bungee cord set. Featuring durable rubber construction and strong steel hooks, these cords offer superior elasticity and come in multiple sizes for versatile use. A convenient storage jar keeps them organized.
MORryde Sliding Cargo Tray for Basements
Easily access your truck bed cargo with the MORryde sliding tray. This fully assembled, carpeted tray boasts an 800 lb capacity and installs in minutes without measuring or cutting.
For those with larger rigs like Class A motorhomes or fifth wheels, the deep basement storage bays present a different challenge: accessibility. This is where a heavy-duty sliding cargo tray, like those from MORryde, becomes the ultimate solution. These are essentially sliding shelves that allow you to bring the entire contents of your bay out into the open.
By installing a sliding tray, you can dedicate a specific, easy-to-reach zone for your leveling blocks and other setup gear. No more kneeling on the wet ground and digging into a dark cavern. You simply pull the tray out, grab your blocks, and push it back in. This isn’t just storage; it’s a fundamental upgrade to your RV’s ergonomics.
Of course, the investment is significant. These trays are not cheap, and installation requires some mechanical comfort. They also add weight to your rig. But for full-timers or serious travelers, the daily convenience can be well worth the cost. It transforms a frustrating, back-straining task into an effortless one, and you can’t put a price on that after a long day of driving.
DIY Bumper-Mounted Crate Storage System
The humble milk crate is a nomad’s best friend, and one of its best uses is as an external storage solution. By securely strapping a sturdy plastic crate to the 4-inch square tube bumper on the back of many RVs, you create an instant, weatherproof cubby for your leveling blocks. This is a classic, battle-tested DIY mod.
The beauty of this system is its simplicity and effectiveness. It costs next to nothing and gets the dirtiest items on your gear list—leveling blocks and sewer hoses—completely outside of your clean living and storage spaces. They’re always accessible and can be hosed off right in the crate.
The key word here is securely. Simply using bungee cords is asking for trouble. You need to use heavy-duty metal U-bolts or specialized bumper mounting brackets to ensure the crate isn’t going anywhere at 65 mph. While it may not be the most aesthetically pleasing option, its sheer practicality is why you see it so often in campgrounds.
Custom Plywood Bay Divider Organization
Sometimes the best solution is the one you build yourself. For nomads with cavernous pass-through storage bays, a few strategically placed pieces of thin plywood can work wonders. You can create a simple, custom-sized "cubby" near the storage bay door specifically for your leveling blocks.
This approach prevents the blocks from sliding into the abyss of the storage bay during travel. They stay put, right where you can reach them. You can size the compartment to perfectly fit your stack of blocks, a wheel chock, and maybe even a few leveling pads, eliminating any wasted space. This method is infinitely customizable to your specific gear and rig.
This requires a bit of DIY spirit, a saw, and a few screws, but it’s a very forgiving project. It doesn’t need to be pretty, it just needs to be functional. The result is a storage system that feels integrated and intentional, not like an afterthought. It’s a satisfying solution that brings order to chaos, one plywood divider at a time.
Choosing Your Ideal Leveling Block Solution
There is no single "best" answer, only the one that’s best for your setup. Your decision should be based on a few key factors:
- Rig Type: A travel trailer has an A-frame to exploit, while a Class A has a deep basement that benefits from a sliding tray. Your rig dictates your options.
- Block Type: Andersen levelers have a specific shape that demands a specific solution, while stackable blocks are more versatile.
- Budget: A DIY crate costs a few dollars, while a sliding cargo tray can cost hundreds. Be realistic about what you’re willing to spend on convenience.
- DIY Skill Level: Are you comfortable drilling into your rig’s bumper or cutting plywood? If not, a simple bag or pre-made tray is your best bet.
Ultimately, the goal is to reduce friction. Think about your current setup process. What’s the most annoying part about getting your levelers out and putting them away? The solution that best solves that specific pain point is the right one for you. Don’t overthink it; start with what’s simple and improve from there.
Proper storage for something as simple as leveling blocks might seem like a minor detail, but nomads know the road to a happy life is paved with these small, intentional choices. By optimizing these little systems, you free up mental energy and physical space for what really matters: the adventure itself.
